我有一个带有VZFS文件系统的VPS主机。如何确定VZFS分区的最大文件大小?
UPD:自由空间(或全部空间)不是我所需要的。有时文件不能占用一个空穴分区卷- fat16有2Gb的限制是一个很好的例子。我需要使用一个大型数据库文件(例如,64 it ),所以我需要知道VPS托管的文件系统是否能够处理它。ext3文件系统使用tune2fs很容易计算,但是VPS通过Virtuozzo使用VSFS,而且它被记录为糟糕。对于linux中的某些文件系统,是否有计算最大文件大小的通用方法?
Q: What is the largest possible size of an ext3 filesystem and of files on ext3?
Ext3 can support files up to 1TB. With a 2.4 kernel the filesystem size is limited by the maximal block device size, which is 2TB. In 2.6 the maximum (32-bit CPU) limit is of block devices is 16TB, but ext3 supports on
我的操作系统和驱动器是
OS: Windows XP sp2 or Linux SUSE 9 or Cygwin
Compiler: Visual C++ 2003 or Gcc or Cygwin
PC and os are both 32 bits
那么,如何在秒内创建一个超大文件?
我被告知要使用MappingFile函数。我无法创建超过2G的文件,所以...您的热情回复将不胜感激
我的问题是,我有一个硬盘,有一个linux服务器(It fails during booting up process)和一些有价值的文件。( tried almost all solutions on the internet but no luck)
现在我找到了一家公司,它可以发送硬盘进行修复,但是由于我的硬盘上有一些有价值的信息,我需要能够复制硬盘并将副本发送给它们(以防丢失、失败等)。
发现了解决方案,但在linux系统正常工作时(如dd ,Partimage ,Partclone )可以正常工作。
但是,我想知道如何在不启动时获得linux硬盘的第二份副本?有可能吗?(我相信,即使
我在我的AWS Ubuntu t2微系统上得到了这个错误。我是Ubuntu/Linux的新手。在安装nodejs软件包时,它建议我运行sudo apt-get -f install。任何帮助都将不胜感激。
$sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following additional packages will be installed
我试图打开我的SD记忆卡,但它没有显示时,插入。虽然当我看USB设备时,它被检测到了。
lsusb
然后我得到:
Bus 001 Device 002: ID 0ac8:c33e Z-Star Microelectronics Corp.
Bus 002 Device 010: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundat