这个脚本的输出是包装的,这是我不想要的。
use strict;
use Net::Telnet;
system("mode 500,6000");
print "passwd: ";
my $passwd=<>;
chomp($passwd);
my $telnet = Net::Telnet->new(Host=>'linux63.blahblah.edu',Prompt=>'/l+inux63> $/');
$telnet->waitfor('/login/');
$
我尝试在linux中通过telnet发送邮件
telnet smtp.gmail.com 587
但是它返回错误
telnet: connect to address to remote host: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
任何人请帮帮忙
当我试图在telnet Linux7.2.1511发行版上运行CentOS服务时,它会引发以下错误:
service telnet restart
Redirecting to /bin/systemctl restart
telnet.service Failed to restart telnet.service: Unit telnet.service failed to load: No such file or directory.
在我的计算机上运行的telnet服务器版本:
rpm -qa | grep telnet
telnet-0.17-59.el7.x86_64
t
我从Linux服务器telnet到windows机器以运行python脚本。该脚本将继续运行约25分钟,但由于Telnet已关闭,它始终在运行约20分钟后退出。在Linux服务器上显示"connection closed by foreign host“。
有没有办法在脚本运行期间保持会话打开?
windows上的Telnet配置:
The following are the settings on localhost
Alt Key Mapped to 'CTRL+A' : YES
Idle session timeout : Not On
我正在运行以下简单的telnet脚本,它只是登录到机器并退出。
同一脚本在一个Linux服务器上运行良好(通过1000次迭代),但在另一个Linux服务器(例如200次尝试后失败)失败(一致)。
在失败的情况下,失败所需的迭代次数是不同的,但是失败是持久的。
#!/usr/bin/perl
use Net::Telnet;
my $loop = 0;
my $dumpfile = "dump.log";
my $inputfile = "input.log";
for ($loop =1; $loop <=1000; $loop++) {
我正在用Qt构建一个telnet服务器应用程序,当我从linux telnet客户端连接时,输出看起来很棒。例如,向我的控制台发送"A“<< endl << "B”<< endl << "C“如下所示:
A
B
C
现在,当我从Windows telnet客户端连接时,我看到
A
B
C
显然,Qt的endl只发送'\n‘。有没有一个简单的解决方案?如果我用"\r\n“替换endl,我现在会搞乱linux客户端吗?我是不是也要冲一冲?
下面是我用来发送到telnet客户端的实际代码:
QString
我在linux上有一个客户端,在windows上有mysql服务器。
我想远程连接到mysql 2台计算机可以相互ping通,在mysql服务器上没有任何问题我正确设置了权限,以便允许指定的客户端进行连接
WIN IP: 192.168.1.2
Linux IP:192.168.1.3
在windows系统中:
GRANT ALL ON *.* TO 'parsa'@'192.168.1.3' IDENTIFIED BY 'parsa';
flush all privileges;
在我的linux中,在my.cnf中,我在mysqld部分写下
谁能这么好解释我呢。在日志auth.log中的linux服务器上,我找到了下一行:
Jul 27 09:16:30 aws-ftp sshd[13186]: Bad protocol version identification 'telnet mail.softlution.com 2222' from 194.120.221.212 port 63085
谷歌给了我这个链接:
https://scottlinux.com/2012/03/07/troubleshooting-ssh-server-logs-and-error-messages/
例6,但是在这个消息域中,t
基于本指南,我试图使用linux的telnet发送一封测试邮件。
https://linuxconfig.org/send-an-email-using-telnet
但连接立即断开:
$ telnet smtp.gmail.com 465
Trying 108.177.126.108...
Connected to smtp.gmail.com.
Escape character is '^]'.
MAIL FROM: asdasd@asd.Connection closed by foreign host
如何保持连接打开足够长的时间来发送测试邮件?