由于这个错误,我的一堆应用程序不再启动(xchat、vmware等)。
xchat: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory
我做了一些搜索,并尝试了一些找到的帖子(在这个网站和其他),但我似乎无法通过这个。我签入了/usr/lib/x86_64-linux_gnu --假设这是它想要找到文件的地方--而且肯定没有条目。我只是不知道怎么把它放在那里。
有人能帮忙吗?
我在为这件事而挣扎。我的WPF应用程序,在调试/发布中运行良好。在我通过InstallShield Express发布它之后,我得到一个运行时异常,程序崩溃。
当程序崩溃时,我可以选择在Visual中调试程序,它在RelayCommand中中断,它看起来像
public class RelayCommand : ICommand
{
public Action<object> _execute;
public RelayCommand(Action<object> execute)
{
this._execute = execu
我想用docker文件从我的工作目录生成pdfs,其中包含了texlive。
/***Dockerfile***/
FROM alpine
RUN sed -i -e 's/v3\.4/edge/g' /etc/apk/repositories
RUN echo 'http://dl-cdn.alpinelinux.org/alpine/edge/testing' >> /etc/apk/repositories
RUN apk update\
&& apk add texlive-full
WORKDIR ./mountvolum
我试图在Xubuntu14.04上运行的CentOS 6.5坞映像中安装一个星号服务器。我从wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/releases/dahdi-linux-complete-2.4.1.2+2.4.1.tar.gz下载了Dahdi,但是当我开始使用make安装它时,我得到了以下错误:
bash-4.1# make all
make -C linux all
make[1]: Entering directory `/usr/src/dahdi-linux-complete-2.
我有一个.bat文件:
set INSTALL_PATH=%1
set CONFIG_PATH=%2
set DB_PASSWORD=%3
set DB_PORT=%4
set DB_PASSWORD=%DB_PASSWORD:"=%
set DB_PORT=%DB_PORT:"=%
%INSTALL_PATH% --mode unattended --unattendedmodeui minimal --disable-components stackbuilder --superpassword %DB_PASSWORD% --serverport %DB_PORT% -
我试图在我的Ubuntu20.04.5上安装一些软件包更新,但是所有的更新都失败了:
dpkg: unrecoverable fatal error, aborting:
files list file for package 'linux-image-5.4.0-42-generic' is missing final newline
我该怎么解决这个问题?
下面是我尝试过的例子:
> sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state
我正在学习如何使用linux,但它不能正常工作
脚本1在我更新opensuse之前一直起作用:
#!/bin/bash
useradd Test
passwd Test123
mkhomedir_helper Test
(现在它说所有这些命令都不存在)
脚本2,我只能进入我的MySql控制台,而他不会执行所有操作:
#!/bin/bash
mysql -u root -ppassword
sleep 3
CREATE USER 'Test'@'localhost' IDENTIFIED BY 'password'
因为我是linux的新手,所以
我试图在gentoo上安装快照,并得到以下错误:
$ sudo emerge snapd
Password:
* IMPORTANT: 10 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
* IMPORTANT: 3 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES and CONFIGURATION FILE
我正在尝试在DreamHost VPS上安装Composer。
Linux 3.1.9-vs2.3.2.5vs2.3.2.5+
Web PHP版本5.4.11
CLI版本PHP 5.4.11 (cli)
phpinfo()输出只有一个对phar的引用,它是--enable-phar=shared,但是当我尝试下面的输出时,它说我需要启用phar。
sudo -u myuser curl -sS https://getcomposer.org/installer | /usr/local/php54/bin/php
#!/usr/bin/env php
Some settings on your
我在我的服务器上安装了laravel 5.1。我收到了致命错误,就像在laravel 5.1 Call to undefined function Illuminate\Foundation\Bootstrap\mb_internal_encoding()中一样,然后我在LoadConfiguration.php中注释了行mb_internal_encoding('UTF-8');。
我又得到了一个致命的错误
Laravel 5.1 : FatalErrorException in Encrypter.php line 48: Call to undefined functio
我的工作环境中托管的默认python环境已经过时了,因此必须更新它们的conda环境。然而,这是非常慢(15-30分钟),我想找到一个更快的方法来获得一个工作环境。
以下是我的最新情况:
!conda update pandas fsspec --yes
这提供了以下输出,关键问题是启动环境不一致(如何?)如failed with repodata from current_repodata.json, will retry with next repodata source. Solving environment: failed with repodata from current_rep
我试图在我的kali Linux 64位操作系统上安装MPLAB X,每次我进入安装的最后部分,我都会收到以下消息:
root@kali:~/Desktop# sudo chmod 755 mla_v2014_07_22_linux_installer.run
root@kali:~/Desktop# sudo ./MPLABX-v2.20-linux-installer.sh
64 Bit, check libraries
Check for 32 Bit libraries
These 32 bit libraries were not found and are needed
我在Nvidia's .deb package的Ubuntu16.04上安装了Nvidia的375驱动程序和CUDA8.0。我想建立图形处理器支持的TensorFlow。这是TensorFlow的configure脚本的输出: ./configure
You have bazel 0.4.5 installed.
Please specify the location of python. [Default is /usr/bin/p
我在更新我的软件时遇到了麻烦。看来新的软件包已经下载了,但是有一个软件包给我带来了麻烦。
这是我在升级软件包时得到的输出:
sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
E: U
我最近将Nativescript更新到了7.1.2
现在,当我运行我的应用程序"tnx run android“时,会出现以下错误:
The current application is not compatible with NativeScript CLI 7.0.
Run 'ns migrate' to migrate your project to NativeScript 7.
Alternatively you may try running it with '--force' to skip this check.
然后我尝试运行