我在我的Proxmox服务器上得到了以下错误。在过去的几天里,这种情况已经发生过多次。我怎样才能测试RAID硬盘是否有问题?
This is an automatically generated mail message from mdadm
running on myserver
A DegradedArray event had been detected on md device /dev/md2.
Faithfully yours, etc.
P.S. The /proc/mdstat file currently contains the following:
Per
在使用gdisk时,有一个选项可以指定十六进制代码。我想知道它是什么,为什么需要它,见下文。因此,例如,如果我在我的驱动器上创建一个软件RAID,我假设我需要代码fd00。但是为什么呢?它是什么,我要用它吗?为什么我不能使用8300创建raid数组(不管这意味着什么)?
Command (? for help): n
Partition number (1-128, default 1):
First sector (34-5860533134, default = 2048) or {+-}size{KMGTP}:
Last sector (2048-5860533134, defaul
在输入lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT时,我得到以下输出:
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 3.7T disk
├─sda1 1M part
├─sda2 512M swap part [SWAP]
├─sda3 3.6T linux_raid_member part
│ └─md2 3.6T ext4 raid1 /d
只有远程访问(没有物理访问)、服务器(即SSH),如何(或者可能是可能的):
找出它是否配置了RAID?如果它是RAID配置的,它是软件还是硬件RAID?这是什么级别的突袭?
找到硬盘的RPM速度吗?
注意:在本例中,我可以访问基于RHEL4 4/5和CentOS4 4/5的Linux服务器。
编辑
下面是来自mount服务器的RHEL4命令的输出:
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/
最近我的一个驱动器在我的RAID中坏了,我正在用一个新的驱动器替换。我使用这个答案来镜像旧驱动器上的分区以进行重新同步。但我担心的是输出。我的驱动器是4k扇区,我第一次做错什么了吗?
Checking that no-one is using this disk right now ...
OK
Warning: partition 1 does not end at a cylinder boundary
Warning: partition 2 does not start at a cylinder boundary
Warning: partition 2 does not end a
接替堆叠溢出,因为我认为那可能是个错误的地方。
我目前正在测试btrfs,作为运行ZFS的NAS的可能替代品。我创建了4个设备,每个设备20 the,并使用balance -dconvert=raid5选项创建了一个btrfs文件系统。然后,我开始使用5GB文件填充FS (现在我有9个文件)。在创建了这些文件(使用来自dd的dev/zero)之后,我启动了balance btrfs balance start。过了一段时间,它会抛出错误error during balancing '.' - No space left on device。syslog将引发以下错误:btrfs