我在下面做了一些测试。看来ifdown ens32并没有降低界面。ip link还在向UP展示。只有ip link set ens32 down才能降低接口。那么这里有什么问题?为什么ifdown不能降低界面?
root:[~]# cat /etc/*release*
Oracle Linux Server release 7.6
NAME="Oracle Linux Server"
VERSION="7.6"
ID="ol"
VARIANT="Server"
VARIANT_ID="server"
VERSION
我编写了NIC模块驱动程序,并实现了ndo_open、ndo_stop、ndo_start_xmit等基本功能。
在最近的版本中,Linux内核API有时会被更改。因此,像LINUX_VERSION_CODE这样的宏有助于在最近的Linux版本中采用模块的代码。在CentOS(RHEL)中,我遇到了更改NIC的MTU与普通Linux不同的函数名。在普通的Linux内核v.3.10.0中,它的原型是:
int (*ndo_change_mtu)(struct net_device *dev,
int new_mtu);
但在Ce
下面是一个在MacOS/X和Linux下编译的最小示例程序。其目的是通过机器的环回设备发送单个节点范围的UDP/IPv6多播数据包。我相信它是正确的,在MacOS/X下它确实可以像预期的那样工作,但在Linux下它失败了,输出如下: Attempting to send an IPv6/UDP packet to multicast address [ff11:0:1:0:94a4:2318:6300:4d51] on interface at index 1 (aka lo)
FAILURE! sendto() returned -1, errno=101 aka [Network is
我想提出以下几点:
/sbin/iptables -t nat -I PREROUTING --src 0/0 --dst [MY IP] -p tcp --dport 40 -j REDIRECT --to-ports 80
但是,我得到了以下错误:
iptables v1.3.5: can't initialize iptables table `/sbin/nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
我正在
场景
我刚得到一个新的互联网连接。它是一种光纤连接,连接到我的linux计算机通过以太网电缆连接到的调制解调器。为了上网,我必须把以太网电缆连接到机器上,然后去x.xxx.xxx.xxx登录(我想是由我的ISP认证)。
问题
上述身份验证地址(x.xxx.xxx.xxx)不会打开。而ping到8.8.8.8和上面所说的身份验证页面(x.xxx.xxx.xxx)返回connect: Network is unreachable。起初,我觉得我的以太网电缆没有被检测到,但事实并非如此。
无电缆连接
ip link show up
1: lo: <LOOPBACK,UP,LOWER_U
我有专有的应用程序向网络发送多播数据包。它在装有NIC MTU 1500的linux上运行。
然后,我编写了一个简单的java程序,使用MulticastSocket类接收消息。我发现它的DatagramPacket大小约为7900。接收器程序在装有NIC MTU 1500的linux上运行。
我用C语言重写了程序,并使用recvfrom()调用,但结果是相同的。
我不明白为什么?数据包大小是否受NIC MTU限制?或者它可以被程序覆盖?
在无线(接口wlp2s0b1)上,我无法连接到我的SSH服务器,但当使用以太网(接口enp1s0f0)时,我可以。
两个接口都在同一个网络上。
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY后连接停止。
我在使用Manjaro Linux。
我没有第一墙。
在服务器上,/var/log/auth.log没有显示任何内容。
我试过但没有成功的东西:
调整MTU (尝试了一堆值):sudo ip li set mtu 1500 dev wlp2s0b1。
更改端口(从22更改为2222)。
设置KexAlgorithms:ssh -oKexAlgorithms=
我知道可以在运行时读取和设置MTU,例如:
adb shell ip -d -s l l dev rmnet0
adb shell ifconfig rmnet0 mtu <MTU>
这存在这样设置的MTU在重启电话后无法保持的问题。
那么,在使用Android开源项目源代码构建自己的版本时,如何配置接口的默认MTU呢?
似乎没有任何地方提到这一点,grepping代码似乎也没有帮助。此外,默认的Linux内核配置文件似乎不存在于Android中。
肯定有办法做到这一点,对吧?
根据
driver_opts是:
com.docker.network.bridge.name - bridge name to be used when creating the Linux bridge
com.docker.network.bridge.enable_ip_masquerade --ip-masq Enable IP masquerading
com.docker.network.bridge.enable_icc --icc Enable or disable inter container connectivity
com.docker.netw
我正在尝试使用套接字选项读取TCP连接的IP_MTU MTU
根据安装在我的Debian man 7 ip上的Debian (我知道,它已经很老了,但是现在不能改变它):
SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/ip.h> /* superset of previous */
[CUT]
IP_MTU Retrieve the current known path MTU of the current soc
试图安装Xen在我的64位O/S (Centos 5)。
使用此指南:http://www.howtoforge.org/paravirtualization-with-xen-on-centos-5.3-x86_64
[root@server ~]# virt-install
What is the name of your virtual machine? vm01
How much RAM should be allocated (in megabytes)? 256
What would you like to use as the disk (file path)? /vm/vm01
尝试无人参与的PXE安装,它在此页失败。
Network autoconfiguration failed
Your network is probably not using the DHCP protocol. Alternatively,
the DHCP server may be slow or some network hardware is not working
properly.
<Continue>
我的DHCP服务器在12.04和所有其他Linux发行版(如RHEL和SLES )中都能正常工作。更重要的是,获取pxelinux.0并下载并启动内核和initr