在升级到Android Studio3.5Canary 1(但将Android Gradle插件版本保持在老版本3.4.1)之后,我开始收到这个错误: ERROR: Variant named 'debug-x86' but only variants named '' were found. “构建变体”窗口是空的,停留在“正在加载”状态。同步、刷新C++项目、构建等都不起作用。
所以我对此非常陌生,我跟踪本教程来设置绑定,直到4:50我没有问题,我可以平,使用nslookup和与dns服务器的互联网连接,然后我们必须添加区域并创建区域文件(只是创建它们),完美,我重新启动以看看是否有任何问题(我使用虚拟机btw),然后我就不能再点击,使用nslookup,我甚至没有互联网连接。这就是我使用systemctl状态得到的结果。
Redirecting to /bin/systemctl status -l named.service
● named.service - Berkeley Internet Name Domain (DNS)
Loaded: load
大家好,我对这一切都很陌生,所以请耐心等待。我试图在eclipse上执行以下python代码,但发现了一些错误:
import pyodbc
from bs4 import BeautifulSoup
我得到了下面这两个错误:
import pyodbc
ModuleNotFoundError: No module named 'pyodbc'
import BeautifulSoup
ModuleNotFoundError: No module named 'BeautifulSoup'
当转到命令提示符并单击pip install pyodbc时,我会
我在Ubuntu上使用Python3.3.2,当我从源代码编译cx_Freeze时,发生了以下错误,有什么想法吗?
philip@linuxmint ~/cx_Freeze-4.3.2 $ sudo python3 setup.py install
[sudo] password for philip:
adding base module named _dummy_thread
adding base module named _frozen_importlib
adding base module named _strptime
adding base module named _thr
当运行以下代码(Python2.7.12,在Linux上使用sudo -H)时,首先是包'plaitpy‘和'bda.basen’从未被安装的情况,
import sys
import os
# The following code successfully installs bda.basen, then fails to import it.
# However, it works for plaitpy (a random recently updated package).
assert '/usr/local/lib/python2.7/dist-pack
在运行于VM ware上的ubuntu 12.04上安装netbeans 6.9.1时,出现以下错误
sudo sh ./jdk-6u22-nb-6_9_1-linux-ml.sh
[sudo] password for samkt:
Configuring the installer...
Searching for JVM on the system...
Preparing bundled JVM ...
./jdk-6u22-nb-6_9_1-linux-ml.sh: 1: eval: /tmp/.nbi-2064057.tmp/jre-6u20-linux-i586.b
所以,我在DO的Ubuntu 16.04.1上使用Phalcon 3.0.0和PHP7。直到今天,当我在Ubuntu上运行apt update and upgrade时,一切都运行正常。进程完成后,Phalcon插件似乎被卸载了,因为phpinfo()中没有phalcon条目,还给出了:
Fatal error: Uncaught Error: Class 'Phalcon\Config' not found in /var/www/example.com/app/config/config.php
我正在将 xenial/main用于phalcon存储库
以下是升级后的内容:
在构建和启动我的应用程序后,我得到了以下错误。我还没能追踪到是什么引起的,但一切都运行得很好。我正在使用MapKit,但不确定是否是它造成的。
Connection error while checking Apple Internalness. Error: Error
Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with
a helper application." (The connection to service named
com.apple.CrashReporterSupportHelpe
我已经上传了定制的映像并创建了它的VM实例。我无法在其中执行SSH。根据故障排除指南,我已经附加了根永久磁盘,并且从日志文件中我发现VM实例经常从日志文件"/var/ log /messages“启动和终止。请在下面找到日志文件
“
Nov 26 11:40:28 linux syslog-ng[1997]: syslog-ng starting up; version='2.0.9'
Nov 26 11:40:33 linux rchal: CPU frequency scaling is not supported by your processor.
Nov 26
我目前正在部署一个使用Tomcat 7的VPS,我看到很多人抱怨我部署了最基本的grails应用程序,例如:
SEVERE: The web application [/BareBones-0.1] appears to have started a thread named [Timer-1] but has failed to stop it. This is very likely to create a memory leak.
Feb 8, 2012 4:32:53 AM org.apache.catalina.loader.WebappClassLoader clearR
我的tomcat在服务器上部署我的项目需要很多时间,如果只是关闭并启动我的项目,它需要5分钟,但如果我更改war文件,部署和运行我的项目需要近30分钟。
我在我的catalina.out中看到了这个警告,这是否与我的tomcat工作缓慢有关?
WARNING [localhost-startStop-2] org.apache.catalina.loader.WebappClassLoaderBase.clearReferencesThreads The web application [proj] appears to have started a thread named [Default
当我尝试添加"add on domain“时,我得到了错误Error from park wrapper: onlineprsuccess.com is already configured. Sorry, that domain is already setup (remove it from httpd.conf)。我检查了网络上的多个线程,发现可以在下面编辑这些文件。
但是我在cPanel中找不到这些文件的位置。
/var/cpanel/users
/var/named/ del the domain.db file
/etc/named.conf
/etc/httpd/conf
我的工作是在64位的ubuntu服务器(10.04.4LTS)上安装和配置Alfresco community edition 4 (alfresco-community-4.0.d-installer-linux-x64.bin)。我试图在没有OpenLDAP服务器的情况下对用户和组进行身份验证和同步,但只要我们对$TOMCAT_HOME/shared/classes/alfresco/extension/subsystems/Authentication/ldap/ldap1/ldap-authentication.properties进行更改,我就必须重新启动tomcat或整个服务器。
我有SMSL M2数模转换器连接PC通过usb,和新安装新的UBUNTU20.10。我的声音也不起作用。alsamixer on f6显示我的smsl卡,但在那里找不到任何混频器。
pacmd list-cards | grep smsl
什么都没显示出来。
aplay -l
拿出我的名片。
lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 De
我的python脚本正在导入python的彩色日志模块,但是它给了我错误:-
ImportError: No module named colorlog
这无疑意味着彩色日志包没有安装在我的linux服务器上。当我试图使用下面的命令安装它时,它也不起作用:-
python -m pip install colorlog
/usr/bin/python: No module named pip
python -m pip install logging
/usr/bin/python: No module named pip
我在这里有什么不正确的命令吗?另外,下面是我正在使用的Linux和P
我的第一篇文章是关于在我的Ubuntu系统(Ubuntu18.04.3LTS/bionic)上设置Yocto开发环境的,这是基于这个web链接()文档中所包含的信息。
All is well until... ~/poky/build$ bitbake core-image-sato
which results in this error:
File "/usr/local/lib/python3.5/sqlite3/dbapi2.py", line 27, in <module>
from _sqlite3 import *
ImportError: No m
安装了import sklearn,但是当我运行ModuleNotFoundError: No module named 'sklearn'时会出现一个错误:ModuleNotFoundError: No module named 'sklearn',请参见下面的内容:
System:
python: 3.8.8 (default, Apr 13 2021, 15:08:03) [MSC v.1916 64 bit (AMD64)]
executable: C:\Users\33826\Anaconda3\python.exe
machine: W
当df输出中没有直接引用分区时,我们如何确定在Linux中安装了哪个分区?
例如,我们系统的fdisk输出是:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 2550 20478976 83 Linux
/dev/sda2 2550 60736 467378176 83 Linux
/dev/sda3 60736 60801 523264 82 L
问题从消息No space left on device开始。(在谷歌的帮助下)调查了一下之后,我发现:
查找:检测到文件系统循环;/var/named/chroot/var/named' is part of the same file system loop as/var/named‘。
我不知道接下来该怎么做。我在centos.org上找到了这个:
and see if the inode numbers are the same (they shouldn't be). If they are then you need to remove the /var/named
$ apropos mkfifo
mkfifo (1) - make FIFOs (named pipes)
mkfifo (1posix) - make FIFO special files
mkfifo (3) - make a FIFO special file (a named pipe)
mkfifo (3posix) - make a FIFO special file
mkfifoat (3) - make a FIFO (named pipe) relative to a directory file
我最近搬到了一个不同的国家,但我在远程工作,因此我认为我的工作空间不会被打扰。但是,现在我正在尝试通过vscode中的ssh连接到我的工作区,连接一直断开。我通过我的工作空间提供的VPN连接到工作空间,虽然我可以通过ssh连接到我工作的linux机器,但我不能像过去几个月那样通过vscode-remote-ssh扩展连接到它。我的计算机上的设置没有任何更改。我附加了在下面尝试连接时vscode提供的输出(这是重新连接尝试的输出,但第一次连接尝试看起来完全相同)。
[15:36:11.086] ------
[15:36:11.086] SSH Resolver called for &