有人能解释一下过滤到loopback接口的流量的下列规则吗?
# Allow all loopback (lo0) traffic and reject traffic
# to localhost that does not originate from lo0.
-A INPUT -i lo -j ACCEPT
-A INPUT ! -i lo -s 127.0.0.0/8 -j REJECT
我对它的解释是:
接受所有传入的数据包到loopback。
拒绝来自127.x.x.x.x的所有不属于loopback的数据包。
这些规则的实际用途是什么?在1的情况下,这是否意味着到loopbac
让我们说,我已经为托管路由器配置了环回地址-
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 10.232.92.102 YES NVRAM up up
GigabitEthernet0/1 10.232.92.106 YES NVRAM up
我的网络由四个路由器组成:
R1(环回网络为11.0.0.0)
R2(环回网络为12.0.0.0)
R3(环路回网13.0.0.0)
R4(环回网络为14.0.0.0)
R3是我的ABR,R4是ASBR路由,有外部RIP路由,并重新分发给OSPF。R1、R2和R3属于10区,R3和R4属于0区。
我已经将区域10配置为存根区域,并在R1、R2和R3中完成了所有必要的配置。一切都很好,但有一件事我很惊讶,我没有广告的R1和R3的回环在ospf,但我仍然能够达到他们,当我删除存根区,他们变得无法到达。请帮我一下
R1:
R1(config-router)#do sh run
Building co
我最近在我的开发机器上安装了Debian压缩器,一切都很顺利--昨天我能够连接到互联网--我把我的硬盘移到了另一台机器上,我无法在Debian中连接到Internet,但是我可以使用Windows连接到它。
我尝试了以下命令,但没有用
/etc/init.d/networking restart
/var/log/syslog doesn't show any error
ping www.google.com results no host found
详细信息
ifconfig
lo Link encap:Local Loopback
in
默认情况下,为什么无法显示Cisco路由器的回送接口?
Router#show ip interface brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/1 unassigned YES NVRAM administratively down down
FastEthernet2/3 unassigned YES unset down down
Fa
来自https://networkengineering.stackexchange.com/questions/57935/is-a-network-interface-supposed-to-have-no-more-than-one-mac-address/57937?noredirect=1#comment100988_57937
基于MAC的网络中的网络接口总是需要一个虚拟或物理的MAC地址.然而,有些网络不是基于MAC的.
ifconfig是否将lo显示为虚拟网络接口?ifconfig不显示其MAC地址,是否意味着lo没有MAC地址,而回环IP地址网络不是基于MAC的?
谢谢。
l
cat /etc/网络/接口
# interfaces(5) file used by ifup(8) and ifdown(8)
# The loopback network interface
#auto lo
#iface lo inet loopback
auto enp0s3
iface enp0s3 inet dhcp
#iface enp0s3 inet loopback
重新启动的命令挂起,上面写着: sudo /etc/init.d/ ……重新启动网络(通过systemctl):networking.service
我只是想知道,当使用池中定义的相同IP执行PAT或在回收站上分配IP并重载该接口时,会产生什么不同。
ip nat pool MYPOOL 1.1.1.1 1.1.1.1 netmask 255.255.255.252
ip nat inside source list 1 POOL MYPOOL overload
interace loopback 103
ip address 1.1.1.1 255.255.255.255
ip nat inside source list 1 interface loopback103 overload
我正在使用Juniper系列路由器来模拟一个小型电信和VPN用户,我需要使用OSPF,以便路由信息可以传播到所有P和PE节点(基本上都是核心路由器和边缘路由器).Note,我不希望路由信息被传递给面向客户的路由器(绿色路由器)。
TAU-PE1:
set protocols ospf area 0.0.0.0 interface ge-0/0/0
set protocols ospf area 0.0.0.0 interface ge-0/0/1
set protocols ospf area 0.0.0.0 interface lo0.0 passive (loopback)
set pr
当我将云服务器从Debian 8升级到Debian 9.12时,我失去了所有的网络连接。我既不能打开服务器,也不能从服务器上切换任何东西。
如果我尝试添加默认网关,就会得到SIOCADDRT: Network is unreachable
如果我输入netstat -anr,就会得到一个空列表
也许还有其他显而易见的事情我应该尝试,但我显然不是那么有知识。
感谢您的帮助和指导。
ip a
1: lo: <LOOPBACK,UP,LOWER_UP. mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loo
我最近安装了UbuntuServer16.04。我已经把以太网电缆连接到我的桌面上了,似乎已经找到了,但是我无法连接到互联网。
下面是一些命令的输出:
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto enp0s25
iface enp0s25 inet dhcp
ip链路
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue s
如何在Debian启动时禁用LAN连接?我不知道是什么建立了这种联系。启动时是否有任何配置文件或我的wicd启动。但是当我打开wicd时,我可以看到通过连线连接是在系统启动后建立的。我不想要这个连接,因为调制解调器连接那时不能工作。如何在启动时禁用LAN?
接口文件:
root@debian:cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see i
当试图在Fedora 29上使用sudo strongswan up CONNECTION_NAME时,我收到了这个错误
installing DNS server ###.##.#.## via resolvconf
resolvconf: Interface can't be the loopback interface (lo). Sorry.
removing DNS server ###.##.#.## via resolvconf
resolvconf: Interface can't be the loopback interface (lo). Sorry.
a
当我运行more interfaces时
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
我在无线上网。如何知道我的ip是静态的还是动态的?当运行ip addr时
1:
如果…的内容
/etc/network/interfaces
包括:
auto lo
iface lo inet loopback
网络管理器中声明的PPTP连接没有错误.当我右击它并连接时,它就能工作了。
但是,如果内容是:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
错误Could not find source connection弹出。它怎么能依赖它呢?
我更改了我的网络设备名称,但是它们在重新启动后不会保存。我还禁用了接口wlan0,但在重新启动后它仍然处于打开状态。使用UBUNTU。
在这里/etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
# The loopback network interface
auto lo
iface lo inet loopbac
在KVM中桥接方面我遇到了一些困难,当我试图解决这个问题时,我注意到了一些奇怪的事情,我的服务器一直有一个IP地址192.168.1.140,当我重新启动时,这种情况一直存在。
然而,在/etc/network/interfaces中,我注意到设置了:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
那么,还有其他地方可以分配这个ip地址吗?
本地主机在我的机器上关闭。
它在我的/etc/network/interfaces中描述过:
auto lo
iface lo inet loopback
auto eth1
iface eth1 inet dhcp
但是当我跑路的时候
route -n" with wireless off
我得到:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
我怎么打开它?
我刚刚在我的电脑上安装了Ubuntu14.04服务器,它有一个有线网络端口和一个wifi卡。我希望服务器使用有线网络,如果是不可用的,并使用wifi时,它是不可用的。
原始/etc/网络/接口如下所示:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loo
我有一个只使用主机和NAT网络而破坏Ubuntu的VMbox。
问题是nat network无法连接NAT网络
我已经设置了如下所示的接口:
GNU nano 2.8.6 File: /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/int