启动系统时会出现以下错误。
现在我正在使用恢复模式,我应该做什么?
*ERROR* UVD not responding, trying to reset the VCPU!!!
*ERROR* UVD not responding, trying to reset the VCPU!!!
*ERROR* UVD not responding, trying to reset the VCPU!!!
*ERROR* UVD not responding, trying to reset the VCPU!!!
*ERROR* UVD not responding, trying to rese
nfs server *** not responding
nfs server *** not responding
nfs server *** not responding
nfs server *** not responding
nfs server *** not responding
nfs server *** not responding
我一次又一次地得到这个,机器就挂了。我怎样才能阻止这个请求?
我也不能启动一个新的ssh连接。
我期待着一种基于第5列读取日志文件和读取主机名的方法,并在所有迭代中保留主机名,直到新的出现为止,或者说,在找到新名称但需要打印整行时,只需标记一个双空格即可。
刚刚读取文件:
$ cat test.py
with open("file", "r") as f:
for line in f:
fr = f.read()
print(fr)
文件内容输出:
$ ./test.py
Jul 18 14:30:02 hw067 kernel: nfs: server hpstor002 not responding, sti
我有很多SiLK流数据,我想对它们进行一些数据挖掘。看起来destination IP列与下一行数据的源IP列相匹配。如何合并R中的源id行和目标id行?我有一些简化的网络流量数据给你:
id sip dip notes
1 20 30 20 is talking to 30
2 20 31 20 is talking to 31
3 20 32 20 is talking to 32
4 30 20 30 is responding to 20
5 31 20
我试图通过theArduino IDE将我的代码上传给Arduino Leonardo,但是:
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): p
我正在Rails 4 Ruby 2中构建一个应用程序
背景:
我有一个名为“Call”的父母脚手架,然后我有一个名为"Respondings“的子脚手架。我在这里试图实现的是能够通过自定义按钮单击"Respondings“表中的”Call“show.html.erb来更新条目。(见下文)
我的路线看起来是这样的:
resources :calls do
resources :respondings, except: [:index], controller: 'calls/respondings' do
member do
最近(在我尝试的所有设备上),当我通过arduino IDE上传我的代码时,我得到了以下错误:
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): p
我是arduino的新手,最近我买了一个Nano,当我尝试上传代码时,它抛出了这个错误: `Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P (Old Bootloader)"
Sketch uses 924 bytes (3%) of program storage space. Maximum is 30720 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local var
我买了一个ralink5370无线适配器。它随机断开。事实上,当它连接与否时,我从lsusb了解它。我运行的是ubuntu 14.04.2最小值。这是连接后的dmesg输出:
[ 5564.693869] usb 3-6: new high-speed USB device number 98 using xhci_hcd
[ 5564.728096] usb 3-6: New USB device found, idVendor=148f, idProduct=5370
[ 5564.728106] usb 3-6: New USB device strings: Mfr=1, Produc
我有grep输出:
Nov 07 16:03:23 SA1789 miner[1397]: GPU4 not responding
Nov 07 16:03:23 SA1789 miner[1397]: Thread(s) not responding. Restarting.
Nov 07 16:02:25 SA0888 miner[1505]: GPU12 not responding
Nov 07 16:02:25 SA0888 miner[1505]: Thread(s) not respon
我无法让我的Arduino Uno的蓝牙模块工作。我遵循了这个网站的说明:
因此,在我的蓝牙设置中,它显示为COM7传入,因此我将其放入put和COM8中作为传出,因此我将其放入arduino IDE中。我得到了这些错误
Sketch uses 3,016 bytes (9%) of program storage space. Maximum is 32,256 bytes.
Global variables use 226 bytes (11%) of dynamic memory, leaving 1,822 bytes for local variables. Maximum is 2
我目前正在尝试使用Arduino和蓝牙模块在Android智能手机上控制RGB LED。如下链接教程所示。
我用的是Arduino Uno我按照教程和代码上传到Arduino,然后显示如下错误信息,无法上传到Arduino。
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide c
我将我的几台Linux服务器与NFS互连。有一段时间一切都很好,但出于某种原因,情况变得越来越不稳定。
示例:将4GB文件从客户端复制到NFS服务器,在完成IO错误之前失败。dmesg充满了
[1525450.884071] nfs: server quackron not responding, timed out
[1525451.384072] nfs: server quackron not responding, timed out
[1525451.884072] nfs: server quackron not responding, timed out
[1525452.384
有时,当我的putty会话连接到服务器时,它会得到这个NFS错误。注意,服务器是基于Solaris 11的。
NFS server <server> not responding still trying
NFS server <server> not responding still trying
NFS server <server> not responding still trying
NFS server <server> not responding still trying
。。经过几次尝试,一切都好了。
NFS server &l
我正在尝试建立我自己的arduino,我在上传代码时遇到了一些问题。
我非常确定我的构建是正确的,因为当我按下reset按钮时,引脚13上的LED闪烁3次。
当我尝试上传时,我得到的错误是:
Arduino: 1.6.0 (Windows 8), Board: "Arduino Uno"
Sketch uses 450 bytes (1%) of program storage space. Maximum is 32,256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2,039
我最近在运行df -h时遇到了问题,它只是挂起了?
我尝试运行dmesg并获得以下代码片段的输出:
[163075.079660] nfs: server 10.52.88.225 not responding, timed out
[163255.559732] nfs: server 10.52.88.225 not responding, timed out
[163255.559746] nfs: server 10.52.88.225 not responding, timed out
[163436.039699] nfs: server 10.52.88.225 not resp
Sinatra没有使用Chrome上的重定向来保持我的会话。它正在创建一个全新的会话,而我丢失了之前所有的会话数据。
作为一个例子(类似于),我这样做:
enable :sessions
get '/foo' do
session[:user_id] = 123
session[:session_id] # "ABC", for example
redirect to('/bar')
end
get '/bar' do
# this is "DEF" when responding to Ch
最近,我购买了一个KVM交换机(这一个),允许我使用两台带有一组外围设备的计算机。该设备工作在所有方面(包括在我的usb键盘和鼠标),但我不能连接我的usb摄像头(这一个)通过KVM。
在将摄像头插入交换机后,我从dmesg获得以下信息:
[ 1590.279218] usb 1-2.2: new high-speed USB device number 20 using xhci_hcd
[ 1590.360101] usb 1-2.2: Device not responding to setup address.
[ 1590.567771] usb 1-2.2: Device not
如何正确地编写nginx服务器的配置?
...
if the client has useragent (A) and it refers to http://somehost.domain/somefile.someextension
nginx responding a file from the root /file.zip
if the client has useragent (B) and it refers to http://somehost.domain/somefile.someextension
nginx responding a file
几年来,我一直使用mbed在线编译器创建.bin文件,然后使用ST-LINK/V2USB加密狗在命令行中像这样刷新它们,一切都运行得无懈可击:
st-flash write 01_blink.NUCLEO_F103RB.bin 0x8000000
今天,我下载了STM32CubeIDE for Linux (Fedora30),并开始使用maple mini (STM32F103CBT6)浏览本教程。
在构建项目并开始调试运行后,我得到了输出:
STMicroelectronics ST-LINK GDB server. Version 5.3.2
Copyright (c) 2019, S
我最近在办公室里发现了一个可疑的装置,我插上了一台备用的电脑。系统将其识别为键盘,并开始单击和键入。无论是恶意设备、恶作剧还是自动化工具,我都想找出它的用途和代码。
插入时:
$ sudo dmesg
[ 59.018129] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[ 59.169828] usb 1-4: New USB device found, idVendor=239a, idProduct=800e, bcdDevice= 1.00
[ 59.169842] usb 1-4: New USB
如何使此脚本捕获它返回的错误类型(500、503、402等)并将其添加到消息中?
#!/bin/bash
hostlist=(s-example1.us s-example2.us)
for host in "${hostlist[@]}"; do
if nc -w 2 -z $host 80; then
echo "INFO: ssh on $host responding [Looks Good]"
else
echo "ERROR: ssh on $host not responding[Ooops