我在Ubuntu10.4上有一个分区布局,如
sfdisk -l /dev/sdb
Disk /dev/sdb: 121575 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdb1 0+ 60- 61- 487424 83 Linux
/de
我正在尝试在我的脚本中创建一个交换分区,使用parted,基于Arch指南。
https://wiki.archlinux.org/title/Parted#Partition_方案
不知怎么的,它总是跳过文件系统类型,而使用它作为分区标签。
手动运行parted的
创建正确的文件系统linux- manually (V1).
。
root@NAS[~]# parted /dev/sdb
GNU Parted 3.4
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(
在NTFS磁盘上,ntfs-3g.usermap命令似乎不起作用:
$ lsblk -no name,fstype | grep sdb1
└─sdb1 ntfs
$ umount /dev/sdb1
$ mount | grep sdb1
$ sudo ntfs-3g.usermap /dev/sdb1
This tool will help you to build a mapping of Windows users
to Linux users.
Be prepared to give Linux user id (uid) and group id
因此,我试图将物理本机CentOS 4.6安装移动到CentOS 5.5服务器上的DomU实例。我遵循了教程@ CentOs - WIki提供的内容,但在运行xm时遇到了以下问题。
📷
Traceback (most recent call last):
File "/usr/bin/pygrub", line 691, in ?
data = fs.open_file(chosencfg["ramdisk"],).read()
IOError: [Errno 2] No such file or directory
No handlers coul
我正在使用Ubuntu 18.04。我试图增加音量sdb2的大小。当试图使用GParted live缩小扩展分区的大小时,我收到了以下错误消息。
Could not add this operation to the list
A partition cannot end (153767936) after the end of the device (%2)
📷
Disk /dev/sdb: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size
我在Thinkpad T480上使用LVM和UEFI运行Ubuntu20.04LTS。
每当我运行sudo update-grub时,我都会得到以下输出:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
/dev/sdb: open failed: No medium found
/dev/sdb: open failed: No medium found
/dev/
我在跑步:fsck -n /dev/sdb2和我得到:
fsck from util-linux 2.31.1
e2fsck 1.44.1 (24-Mar-2018)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb2
The superblock could not be read or does
如何将Grub完全移动到一个新的分区?当我安装Ubuntu (Kubuntu)时,我只为/boot分区分配了256个D0,这似乎还不够。每次安装新内核时,安装都会部分失败,因为没有足够的空间,所以我不得不手动干预。因此,我试图将grub从旧的引导分区/dev/sdb5移动到新的512 MiB分区/dev/sdb7。
我编辑了/etc/fstab以指向使用新的引导分区。
# /boot was on /dev/sdb5 during installation
#UUID=f1fcbfbe-7943-4e48-9796-8d0c42076c0b /boot ext4 defau