需求:两台服务器(A、B),在服务器A上存放着大量的图片,需要在每天夜里三点同步到服务器B,源目录和目的目录都是/image 启用程序:rsync 服务器A上的配置: 1、/etc/rsyncd.conf...uid = nobody gid = nobody use chroot = no max connectionts = 6 read only = yes hosts allow = 192.168.95.0...之后执行命令 rsync -arv --password-file=/etc/rsyncd.passwd rsync://root@192.168.95.11/test /image/ 这样就开始同步了...5) at main.c(1503) [receiver=3.0.6] 这个报错表明密码文件的权限有问题,正常的密码文件权限应为600 The --password-file option may only...be used when accessing an rsync daemon.
The rsyncd.conf file is the runtime configuration file for rsync when run as an rsync daemon. ...This can be overridden by the --dparam=motdfile=FILE command-line option when starting the daemon. pid...This can be overridden by the --dparam=pidfile=FILE command-line option when starting the daemon. port...more group names/IDs that will be used when accessing the module....RSYNC_HOST_ADDR: The accessing host's IP address. RSYNC_HOST_NAME: The accessing host's name.
The transfer may be faster if this option is used when the bandwidth between the...This only affects direct socket connections to a remote rsync daemon....accessing a remote rsync daemon....Note that this option is only useful when accessing an rsync daemon using the built in...outgoing socket when directly contacting an rsync daemon.
This may be a site-wide or a personal directory....[/root/.cpan] Unless you are accessing the CPAN on your filesystem via a file: URL, CPAN.pm needs to...If you set the 'auto_commit' option to true, changes to a config variable are always automatically committed...1000 The CPAN indexes are usually rebuilt once or twice per hour, but the typical CPAN mirror mirrors only...Note: this mechanism is not used when use_sqlite is on and SQLLite is running.
[DEST] rsync [OPTION...] rsync://[USER@]HOST[:PORT]/SRC... [DEST] Push: rsync [OPTION...]...lock file = /var/run/rsync.lock log file = /var/log/rsyncd.log ignore errors read only = false list... you want to use or using the --password-file option....This may be useful when scripting rsync....;局部变量参数只针对指定模块生效 read only参数默认配置为ture,即为只读模式 全局变量发生变化,不用重启rsync服务;局部变量发生变化,需要重启rsync服务 注意:修改配置文件就重启 ↓
This may take a few minutes......: in which case you may ignore this message....If you disable this, then # boxes will only be checked for updates when the user runs # `vagrant...In the example below, # accessing "localhost:8080" will access port 80 on the guest machine....", # rsync__exclude: ".git/", #rsync__args: ["--verbose", "--rsync-path='sudo rsync'", "--archive"
Only needed when run in daemon mode....Disabling this option is only recommended when debugging....Only applies when running as root....Only applies when running as root....The special variable strings $USER and $HOME may be used.
::data /backfile --password-file=/etc/rsync.password --port=873 参数解释: -vzrtopg:-v表示“--verbose”,即详细模式输出...backuser@172.24.8.10::data --password-file=/etc/rsync.password --port=873 #从客户端上传文件至服务端 3.2 开机启动chkconfig..."rsync --daemon....} 15 status2=$(ps -ef | egrep "rsync --daemon....= "X" ]; then 26 kill -9 $(cat $pidfile) 27 status2=$(ps -ef | egrep "rsync --daemon
$ rsync file1 file2 ... user@host: Unless you supply extra options, rsync copies only files....With no special options, rsync operates quietly, only producing output when there is a problem....s 12.4.10 Accessing Files as a Client(以客户端身份访问文件) If you need only casual access to files in a disk share...that your system will mount the filesystems only when you actually try to use them in order to prevent...The picture becomes more complicated when you have a larger network with many users accessing many different
May 12 10:44 /backup/ #创建同步用户的密码文件,并把权限设为600 [root@backup ~]# echo "rsync_backup:password" >/etc/rsync.password...-password-file=/etc/rsync.password sending incremental file list ./ test.txt sent 78 bytes received...: -d run as a daemon option: -r rsync all the local files to the remote servers before the...all the files to the remote servers entirely use rsync password-file : user is rsync_backup (用户名...-az -R --delete ./ rsync_backup@172.16.1.41::backup --password-file=/etc/rsync.password >/dev/null 2
[DEST] Push: rsync [OPTION...] SRC......[DEST] rsync [OPTION...] rsync://[USER@]HOST[:PORT]/SRC... [DEST] Push: rsync [OPTION...]...: rsync [OPTION...]...[DEST] 4 Push: rsync [OPTION...] SRC... [USER@]HOST::DEST 5 rsync [OPTION...]...::back_db_module 2 ERROR: password file must be owned by root when running as root 3 rsync error: syntax
We can see that the mode and the f option, which isused to specify the name of the tar archive, may be...The –files-from option(which may be also be specified as -T) causes tar to read its list of pathnames...The unzip program allows its output to be sent to standard output when the -p (forpipe) option is specified...We included the –delete option to removefiles that may have existed on the backup device that no longer...在网络间使用 rsync 命令 One of the real beauties of rsync is that it can be used to copy files over a network.After
[DEST] 7 Push: rsync [OPTION...] SRC......[DEST] 13 Push: rsync [OPTION...] SRC... [USER@]HOST::DEST 14 rsync [OPTION...]...: rsync [OPTION...]...[DEST] 4 Push: rsync [OPTION...] SRC... [USER@]HOST::DEST 5 rsync [OPTION...]...::back_db_module 2 ERROR: password file must be owned by root when running as root 3 rsync error: syntax
rsync客户端配置 创建认证文件,只需密码即可 ? 测试数据同步的方法 Access via rsync daemon: Pull: rsync [OPTION...]...[DEST] 如:rsync --password-file=/etc/rsync.passwd scholar@172.16.10.212::web /web rsync [OPTION...[DEST] 如:rsync --password-file=/etc/rsync.passwd rsync://scholar@172.16.10.212/web /web Push: rsync...[OPTION...]...rsync [OPTION...]
Usage: rsync [OPTION]... SRC [SRC]... DEST or rsync [OPTION]... SRC [SRC]......[USER@]HOST:DEST or rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST or rsync [OPTION]......SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST or rsync [OPTION]......[USER@]HOST:SRC [DEST] or rsync [OPTION]......rsync --password-file=/etc/rsyncd.passwd rs@192.168.200.251:: rsync --password-file=/etc/rsyncd.passwd
rsync是一个功能非常强大的工具,Rsync的命令格式可以为以下六种: rsync [OPTION]... SRC DEST rsync [OPTION]......SRC [USER@]HOST:DEST rsync [OPTION]... [USER@]HOST:SRC DEST rsync [OPTION]......[USER@]HOST::SRC DEST rsync [OPTION]......SRC [USER@]HOST::DEST rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST] 对应于以上六种命令格式,rsync有六种不同的工作模式...ftp 这个是描述要共享的东东 ignore errors read only = yes list = no auth users = rsync_test
Usage: rsync [OPTION]... SRC [SRC]... DEST or rsync [OPTION]... SRC [SRC]......[USER@]HOST:DEST or rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST or rsync [OPTION]......SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST or rsync [OPTION]......[USER@]HOST:SRC [DEST] or rsync [OPTION]......=OPT, -M send OPTION to the remote side only --out-format=FORMAT output updates using the specified
In many cases, an object accessed in the union will be indistinguishable from accessing the corresponding...Similarly st_ino will only be unique when combined with st_dev, and both of these can change over the...A read-only overlay of two read-only filesystems may use any filesystem type....Enable this option only when worried about backward compatibility with kernels that have the redirect_dir...Metadata only copy up -------------------- When metadata only copy up feature is enabled, overlayfs will
commands like GET. # # This option is usually useful when using Redis as an LRU cache, or to set # a...The INFO # command shows only the memory used to store the redis data, not the extra # memory used by...may happen when the system where Redis is running # crashes, especially when an ext4 filesystem is mounted...without the # data=ordered option (however this can't happen when Redis itself # crashes or aborts but...This option only applies when # Redis will try to read more data from the AOF file but not enough bytes
软件工作方式 本地数据同步(类似与cp) 格式: rsync [OPTION...]...[OPTION...]...中最重要的部分 格式(拉):Pull: rsync [OPTION...]...[DEST] 格式(推):Push: rsync [OPTION...] SRC... [USER@]HOST::DEST rsync [OPTION...]...说明:rsyncd.conf配置文件中,添加多模块信息,可以不用重启rsync服务,即时生效 全局变量参数针对所有模块生效;局部变量参数只对指定模块生效 read only参数默认配置为ture,即为只读模式
领取专属 10元无门槛券
手把手带您无忧上云