本文承接上一节:Spring_总结_02_依赖注入
在上一节我们了解到依赖注入的实质就是装配。
这一节我们来学习下装配Bean的相关知识。
Spring提供了三种主要的bean的装配机制:
(1)注解配置——隐式的bean发现机制和自动装配
(2)Java配置——在Java中进行显示配置
(3)XML配置——在XML中进行显示配置
(1)第一考虑自动装配,显示配置越少越好。
(2)当必须要显示配置的时候,再使用类型安全并且比XML更强大的JavaConfig
(3)最后,只有当你想用使用便利的XML命名空间,并且在JavaConfig中没有同样的实现时,才应该使用XML。
这里以一个小例子来阐述组件扫描和装配。创建CompactDisc类,Spring会发现它并为其创建一个bean。然后,创建一个CDPlayer类,Spring会发现它,并将CompactDisc bean注入进来。
Spring从两个角度来实现自动化装配:
(1)组件扫描(component scanning):Spring 会自动发现应用上下文中所创建的bean
(2)自动装配(autowiring):Spring 自动满足bean之间的依赖
实现自动装配的过程如下:
(1)启用组件扫描: @ComponentScan
(2)声明bean : @Component
(3) 自动装配bean : @Autowired
组件扫描默认是不开启的,我们需要显示配置一下Spring,从而让它寻找带有@Component注解的类,并为其创建Bean。
配置类 CDPlayerConfig
@Configuration //1
@ComponentScan //2
public class CDPlayerConfig {
}
1处:声明这是一个配置类
2处:开启组件扫描。默认会扫描配置类所在同级包及其子包,查找带有@Component注解的类。
ComponentScan源码:
/*
* Copyright 2002-2016 the original author or authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.springframework.context.annotation;
import java.lang.annotation.Documented;
import java.lang.annotation.ElementType;
import java.lang.annotation.Repeatable;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;
import org.springframework.beans.factory.support.BeanNameGenerator;
import org.springframework.core.annotation.AliasFor;
import org.springframework.core.type.filter.TypeFilter;
/**
* Configures component scanning directives for use with @{@link Configuration} classes.
* Provides support parallel with Spring XML's {@code <context:component-scan>} element.
*
* <p>Either {@link #basePackageClasses} or {@link #basePackages} (or its alias
* {@link #value}) may be specified to define specific packages to scan. If specific
* packages are not defined, scanning will occur from the package of the
* class that declares this annotation.
*
* <p>Note that the {@code <context:component-scan>} element has an
* {@code annotation-config} attribute; however, this annotation does not. This is because
* in almost all cases when using {@code @ComponentScan}, default annotation config
* processing (e.g. processing {@code @Autowired} and friends) is assumed. Furthermore,
* when using {@link AnnotationConfigApplicationContext}, annotation config processors are
* always registered, meaning that any attempt to disable them at the
* {@code @ComponentScan} level would be ignored.
*
* <p>See {@link Configuration @Configuration}'s Javadoc for usage examples.
*
* @author Chris Beams
* @author Juergen Hoeller
* @author Sam Brannen
* @since 3.1
* @see Configuration
*/
@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.TYPE)
@Documented
@Repeatable(ComponentScans.class)
public @interface ComponentScan {
/**
* Alias for {@link #basePackages}.
* <p>Allows for more concise annotation declarations if no other attributes
* are needed — for example, {@code @ComponentScan("org.my.pkg")}
* instead of {@code @ComponentScan(basePackages = "org.my.pkg")}.
*/
@AliasFor("basePackages")
String[] value() default {};
/**
* Base packages to scan for annotated components.
* <p>{@link #value} is an alias for (and mutually exclusive with) this
* attribute.
* <p>Use {@link #basePackageClasses} for a type-safe alternative to
* String-based package names.
*/
@AliasFor("value")
String[] basePackages() default {};
/**
* Type-safe alternative to {@link #basePackages} for specifying the packages
* to scan for annotated components. The package of each class specified will be scanned.
* <p>Consider creating a special no-op marker class or interface in each package
* that serves no purpose other than being referenced by this attribute.
*/
Class<?>[] basePackageClasses() default {};
/**
* The {@link BeanNameGenerator} class to be used for naming detected components
* within the Spring container.
* <p>The default value of the {@link BeanNameGenerator} interface itself indicates
* that the scanner used to process this {@code @ComponentScan} annotation should
* use its inherited bean name generator, e.g. the default
* {@link AnnotationBeanNameGenerator} or any custom instance supplied to the
* application context at bootstrap time.
* @see AnnotationConfigApplicationContext#setBeanNameGenerator(BeanNameGenerator)
*/
Class<? extends BeanNameGenerator> nameGenerator() default BeanNameGenerator.class;
/**
* The {@link ScopeMetadataResolver} to be used for resolving the scope of detected components.
*/
Class<? extends ScopeMetadataResolver> scopeResolver() default AnnotationScopeMetadataResolver.class;
/**
* Indicates whether proxies should be generated for detected components, which may be
* necessary when using scopes in a proxy-style fashion.
* <p>The default is defer to the default behavior of the component scanner used to
* execute the actual scan.
* <p>Note that setting this attribute overrides any value set for {@link #scopeResolver}.
* @see ClassPathBeanDefinitionScanner#setScopedProxyMode(ScopedProxyMode)
*/
ScopedProxyMode scopedProxy() default ScopedProxyMode.DEFAULT;
/**
* Controls the class files eligible for component detection.
* <p>Consider use of {@link #includeFilters} and {@link #excludeFilters}
* for a more flexible approach.
*/
String resourcePattern() default ClassPathScanningCandidateComponentProvider.DEFAULT_RESOURCE_PATTERN;
/**
* Indicates whether automatic detection of classes annotated with {@code @Component}
* {@code @Repository}, {@code @Service}, or {@code @Controller} should be enabled.
*/
boolean useDefaultFilters() default true;
/**
* Specifies which types are eligible for component scanning.
* <p>Further narrows the set of candidate components from everything in {@link #basePackages}
* to everything in the base packages that matches the given filter or filters.
* <p>Note that these filters will be applied in addition to the default filters, if specified.
* Any type under the specified base packages which matches a given filter will be included,
* even if it does not match the default filters (i.e. is not annotated with {@code @Component}).
* @see #resourcePattern()
* @see #useDefaultFilters()
*/
Filter[] includeFilters() default {};
/**
* Specifies which types are not eligible for component scanning.
* @see #resourcePattern
*/
Filter[] excludeFilters() default {};
/**
* Specify whether scanned beans should be registered for lazy initialization.
* <p>Default is {@code false}; switch this to {@code true} when desired.
* @since 4.1
*/
boolean lazyInit() default false;
/**
* Declares the type filter to be used as an {@linkplain ComponentScan#includeFilters
* include filter} or {@linkplain ComponentScan#excludeFilters exclude filter}.
*/
@Retention(RetentionPolicy.RUNTIME)
@Target({})
@interface Filter {
/**
* The type of filter to use.
* <p>Default is {@link FilterType#ANNOTATION}.
* @see #classes
* @see #pattern
*/
FilterType type() default FilterType.ANNOTATION;
/**
* Alias for {@link #classes}.
* @see #classes
*/
@AliasFor("classes")
Class<?>[] value() default {};
/**
* The class or classes to use as the filter.
* <p>The following table explains how the classes will be interpreted
* based on the configured value of the {@link #type} attribute.
* <table border="1">
* <tr><th>{@code FilterType}</th><th>Class Interpreted As</th></tr>
* <tr><td>{@link FilterType#ANNOTATION ANNOTATION}</td>
* <td>the annotation itself</td></tr>
* <tr><td>{@link FilterType#ASSIGNABLE_TYPE ASSIGNABLE_TYPE}</td>
* <td>the type that detected components should be assignable to</td></tr>
* <tr><td>{@link FilterType#CUSTOM CUSTOM}</td>
* <td>an implementation of {@link TypeFilter}</td></tr>
* </table>
* <p>When multiple classes are specified, <em>OR</em> logic is applied
* — for example, "include types annotated with {@code @Foo} OR {@code @Bar}".
* <p>Custom {@link TypeFilter TypeFilters} may optionally implement any of the
* following {@link org.springframework.beans.factory.Aware Aware} interfaces, and
* their respective methods will be called prior to {@link TypeFilter#match match}:
* <ul>
* <li>{@link org.springframework.context.EnvironmentAware EnvironmentAware}</li>
* <li>{@link org.springframework.beans.factory.BeanFactoryAware BeanFactoryAware}
* <li>{@link org.springframework.beans.factory.BeanClassLoaderAware BeanClassLoaderAware}
* <li>{@link org.springframework.context.ResourceLoaderAware ResourceLoaderAware}
* </ul>
* <p>Specifying zero classes is permitted but will have no effect on component
* scanning.
* @since 4.2
* @see #value
* @see #type
*/
@AliasFor("value")
Class<?>[] classes() default {};
/**
* The pattern (or patterns) to use for the filter, as an alternative
* to specifying a Class {@link #value}.
* <p>If {@link #type} is set to {@link FilterType#ASPECTJ ASPECTJ},
* this is an AspectJ type pattern expression. If {@link #type} is
* set to {@link FilterType#REGEX REGEX}, this is a regex pattern
* for the fully-qualified class names to match.
* @see #type
* @see #classes
*/
String[] pattern() default {};
}
}
其中,通过 basePackages 可用String类型来指定基础包。
通过 basePackageClasses 可用类或接口(建议使用空标记接口)来指定基础包,这些类或接口所在的包将会作为组件扫描的基础包。
示例如下:
@Configuration
@ComponentScan(basePackages = "com.ray.soundsystem")
public class CDPlayerConfig {
}
@Configuration
@ComponentScan(basePackages = {"com.ray.soundsystem","com.ray.video"})
public class CDPlayerConfig {
}
public interface SoundSystemScanConfig {
}
public interface VideoScanConfig {
}
@Configuration
@ComponentScan(basePackageClasses = {SoundSystemScanConfig.class,VideoScanConfig.class})
public class CDPlayerConfig {
}
@Component
public class ComPactDisc {
public void play(){
System.out.println("play music");
}
}
如上述代码所示,通过@Component来声明一个组件,表明该类会作为组件类,并告知Spring要为这个类创建bean。
可用以下注解来声明一个组件:
通过查看源码,可知,@Controller、@Service、@Repository 能声明bean 是因为他们都组合了@Component。
以Controller为例:
@Target({ElementType.TYPE})
@Retention(RetentionPolicy.RUNTIME)
@Documented
@Component
public @interface Controller
Spring 会为所有的bean都指定一个ID,默认为类名首字母小写。
但也可通过@Component的value属性来将为bean命名,如:
@Component("compactDisc1")
public class ComPactDisc {
public void play(){
System.out.println("play music");
}
}
public class CDPlayer {
private ComPactDisc cd;
@Autowired
public CDPlayer( ComPactDisc cd){
this.cd =cd;
}
public void play(){
cd.play();
}
}
(1)通过 @Autowired 注解,声明让Spring来自动注入符合要求的bean
(2)@Autowired 注解可用在属性上以及任何方法上。
(3)当@Autowired 注解用在方法上时,Spring会尝试满足方法参数上所声明的依赖。假如有且只有一个bean匹配依赖需求,那么这个bean将会被装配进来。
在Spring中,只要容器中存在某个bean,就可以在另外一个Bean的声明方法的参数中注入。
用来注入bean的注解还有:
@Inject
@Resource