This can sometimes crash network scanners and even drivers!
OPTIONS:
-n <ssid> Use SSID <ssid> instead of randomly generated ones 给AP信号指定名称,不使用就随机生成
-f <filename> Read SSIDs from file 可以从文件中读取AP名称
-v <filename> Read MACs and SSIDs from file. See example file! 可以从文件中读取ap mac和名称
-d Show station as Ad-Hoc 自定义为Ad-Hoc模式
-w Set WEP bit (Generates encrypted networks) 自定义为wep加密
-g Show station as 54 Mbit 自定义为54M模式
-t Show station using WPA TKIP encryption 自定义为wpaTKIP 加密
-a Show station using WPA AES encryption 自定义为wpa AES 加密
-m Use valid accesspoint MAC from OUI database 读取数据库中的mac
-h Hop to channel where AP is spoofed。This makes the test more effective against some devices/drivers。But it reduces packet rate due to channel hopping.
-c <chan> Fake an AP on channel <chan>. If you want your card to hop onl, this channel, you have to set -h option, too! 自定义信道
-s <pps> Set speed in packets per second (Default: 50) 自定义发包速率
-w <filename> Read file containing MACs not to care about (Whitelist mode) 指定白名单mac
-b <filename> Read file containing MACs to run test on (Blacklist Mode) 指定mac黑名单
-s <pps> Set speed in packets per second (Default: unlimited) 发包速率
-c [chan,chan,chan,...] Enable channel hopping. Without providing any channels, mdk3 will hop an all 14 b/g channels. Channel will be changed every 5 seconds.指定信道,可以用逗号分隔多个信道