Docker私有Registry在CentOS6.X下安装指南

白石

发布于 2019-08-23 10:15:04

5900

发布于 2019-08-23 10:15:04

文章被收录于专栏：白石白石

(WJW)Docker私有Registry在CentOS6.X下安装指南

说明:

docker.yy.com 这是docker registry服务器的域名也就是你的公司docker私有服务器的主机地址，假定ip是192.168.2.114;因为https的SSL证书不能用IP地址，我就随便起了个名字。
registry 服务器作为上游服务器处理docker镜像的最终上传和下载，用的是官方的镜像。
nginx 1.4.x 是一个用nginx作为反向代理服务器

[X] Docker Server端配置

安装依赖

yum -y install gcc make file && \
yum -y install tar pcre-devel pcre-staticopenssl openssl-devel httpd-tools

配置SSL

(1) 编辑`/etc/hosts`,把`docker.yy.com`的ip地址添加进来,例如:

192.168.2.114 docker.yy.com

(2) 生成根密钥

先把

/etc/pki/CA/cacert.pem /etc/pki/CA/index.txt /etc/pki/CA/index.txt.attr /etc/pki/CA/index.txt.old /etc/pki/CA/serial /etc/pki/CA/serial.old

删除掉!

cd /etc/pki/CA/
openssl genrsa -out private/cakey.pem 2048

(3) 生成根证书

openssl req -new -x509 -key private/cakey.pem -out cacert.pem

输出:

You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:CN
State or Province Name (full name) []:beijing
Locality Name (eg, city) [Default City]:beijing
Organization Name (eg, company) [Default Company Ltd]:youyuan
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []:docker.yy.com
Email Address []:

会提示输入一些内容，因为是私有的，所以可以随便输入，最好记住能与后面保持一致,特别是"Common Name"。上面的自签证书cacert.pem应该生成在/etc/pki/CA下。

(4) 为我们的nginx web服务器生成ssl密钥

mkdir -p /etc/nginx/ssl
cd /etc/nginx/ssl
openssl genrsa -out nginx.key 2048

我们的CA中心与要申请证书的服务器是同一个，否则应该是在另一台需要用到证书的服务器上生成。

(5) 为nginx生成证书签署请求

openssl req -new -key nginx.key -out nginx.csr

输出:

You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:CN
State or Province Name (full name) []:beijing
Locality Name (eg, city) [Default City]:beijing
Organization Name (eg, company) [Default Company Ltd]:youyuan
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []:docker.yy.com
Email Address []:

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:

同样会提示输入一些内容，Commone Name一定要是你要授予证书的服务器域名或主机名，challenge password不填。

(6) 私有CA根据请求来签发证书

touch /etc/pki/CA/index.txt
touch /etc/pki/CA/serial
echo 00 > /etc/pki/CA/serial
openssl ca -in nginx.csr -out nginx.crt

输出:

Using configuration from /etc/pki/tls/openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
        Serial Number: 0 (0x0)
        Validity
            Not Before: Dec  9 09:59:20 2014 GMT
            Not After : Dec  9 09:59:20 2015 GMT
        Subject:
            countryName               = CN
            stateOrProvinceName       = beijing
            organizationName          = youyuan
            commonName                = docker.yy.com
        X509v3 extensions:
            X509v3 Basic Constraints:
                CA:FALSE
            Netscape Comment:
                OpenSSL Generated Certificate
            X509v3 Subject Key Identifier:
                5D:6B:02:FF:9E:F8:EA:1B:73:19:47:39:4F:88:93:9F:E7:AC:A5:66
            X509v3 Authority Key Identifier:
                keyid:46:DC:F1:A5:6F:39:EC:6E:77:03:3B:C4:34:03:7E:B8:0A:ED:99:41

Certificate is to be certified until Dec  9 09:59:20 2015 GMT (365 days)
Sign the certificate? [y/n]:y


1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated

同样会提示输入一些内容，选择y就可以了!

安装,配置,运行nginx

(1) 添加组和用户:

groupadd www -g 58
useradd -u 58 -g www www

(2) 下载nginx源文件:

cd /tmp
wget http://nginx.org/download/nginx-1.4.6.tar.gz
cp ./nginx-1.4.6.tar.gz /tmp/

(3) 编译,安装nginx:

tar zxvf ./nginx-1.4.6.tar.gz
cd ./nginx-1.4.6 && \
  ./configure --user=www --group=www --prefix=/opt/nginx \
  --with-pcre \
  --with-http_stub_status_module \
  --with-http_ssl_module \
  --with-http_addition_module  \
  --with-http_realip_module \
  --with-http_flv_module && \
  make && \
  make install
cd /tmp
rm -rf /tmp/nginx-1.4.6/
rm /tmp/nginx-1.4.6.tar.gz

(4) 生成htpasswd

htpasswd -cb /opt/nginx/conf/.htpasswd ${USER} ${PASSWORD}

(5) 编辑`/opt/nginx/conf/nginx.conf`文件

#daemon off;

# 使用的用户和组
user  www www;
# 指定工作进程数(一般等于CPU总核数)
worker_processes  auto;

# 指定错误日志的存放路径,错误日志记录级别选项为:[debug | info | notic | warn | error | crit]
error_log  /var/log/nginx_error.log  error;

#指定pid存放的路径
#pid        logs/nginx.pid;

# 指定文件描述符数量
worker_rlimit_nofile 51200;

events {
    # 使用的网络I/O模型,Linux推荐epoll;FreeBSD推荐kqueue
    use epoll;
    # 允许的最大连接数
    worker_connections  51200;
    multi_accept on;
}

http {
  include       mime.types;

  log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                    '$status $body_bytes_sent "$http_referer" '
                    '"$http_user_agent" "$upstream_addr"';

  access_log  /var/log/nginx_access.log  main;

  # 服务器名称哈希表的桶大小,该默认值取决于CPU缓存
  server_names_hash_bucket_size 128;
  # 客户端请求的Header头缓冲区大小
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;

  # 启用sendfile()函数
  sendfile        on;
  tcp_nopush      on;
  tcp_nodelay     on;

  keepalive_timeout  65;

  upstream registry {
    server 127.0.0.1:5000;
  }

  server {
    listen       443;
    server_name  192.168.2.114;

    ssl                  on;
    ssl_certificate /etc/nginx/ssl/nginx.crt;
    ssl_certificate_key /etc/nginx/ssl/nginx.key;

    client_max_body_size 0; # disable any limits to avoid HTTP 413 for large image uploads

    # required to avoid HTTP 411: see Issue #1486 (https://github.com/docker/docker/issues/1486)
    chunked_transfer_encoding on;

    location / {
      auth_basic "registry";
      auth_basic_user_file /opt/nginx/conf/.htpasswd;

      root   html;
      index  index.html index.htm;

      proxy_pass                  http://registry;
      proxy_set_header  Host           $http_host;
      proxy_set_header  X-Real-IP      $remote_addr;
      proxy_set_header  Authorization  "";

      client_body_buffer_size     128k;
      proxy_connect_timeout       90;
      proxy_send_timeout          90;
      proxy_read_timeout          90;
      proxy_buffer_size           8k;
      proxy_buffers               4 32k;
      proxy_busy_buffers_size     64k;  #如果系统很忙的时候可以申请更大的proxy_buffers 官方推荐*2
      proxy_temp_file_write_size  64k;  #proxy缓存临时文件的大小
    }
    location /_ping {
      auth_basic off;
      proxy_pass http://registry;
    }
    location /v1/_ping {
      auth_basic off;
      proxy_pass http://registry;
    }
  }
}

(6) 验证配置

/opt/nginx/sbin/nginx -t

输出:

nginx: the configuration file /opt/nginx/conf/nginx.conf syntax is ok nginx: configuration file /opt/nginx/conf/nginx.conf test is successful

(7) 启动nginx:

/opt/nginx/sbin/nginx

(8) 验证nginx是否启动:

ps -ef | grep -i 'nginx'

如下输出就表明nginx一切正常!

root     27133     1  0 18:58 ?        00:00:00 nginx: master process /opt/nginx/sbin/nginx
www      27134 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27135 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27136 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27137 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27138 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27139 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27140 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27141 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27142 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27143 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27144 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27145 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27146 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27147 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27148 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27149 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27150 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27151 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27152 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27153 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27154 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27155 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27156 27133  0 18:58 ?        00:00:00 nginx: worker process
www      27157 27133  0 18:58 ?        00:00:00 nginx: worker process
root     27160 42863  0 18:58 pts/0    00:00:00 grep -i nginx

配置,运行Docker

(1) 停止docker

service docker stop

(2)编辑`/etc/sysconfig/docker`文件,加上如下一行

DOCKER_OPTS="--insecure-registry docker.yy.com --tlsverify --tlscacert /etc/pki/CA/cacert.pem"

(3) 把根证书复制到`/etc/docker/certs.d/docker.yy.com/`目录下

mkdir -p /etc/docker/certs.d/docker.yy.com/
cp /etc/pki/CA/cacert.pem /etc/docker/certs.d/docker.yy.com/ca-certificates.crt

(4) 启动docker

service docker start

下载,配置,运行`registry`image

(1) 获取Image

docker pull registry

(2) 运行Image

mkdir -p /opt/registry
docker run -d -e STORAGE_PATH=/registry -v /opt/registry:/registry -p 127.0.0.1:5000:5000 --name registry registry

命令稍加解释一下: -p 127.0.0.1:5000:5000 registry 作为上游服务器，这个 5000 端口可以不用映射出来，因为所有的外部访问都是通过前端的nginx来提供，nginx 可以在私有网络访问 registry 。

(3) 验证registry:

用浏览器输入: https://docker.yy.com 或者:curl -i -k https://abc:123@docker.yy.com

服务端的配置就到此完成!

[X] Docker客户端配置

(1) 编辑`/etc/hosts`,把`docker.yy.com`的ip地址添加进来,例如:

192.168.2.114 docker.yy.com

(2) 把docker registry服务器端的根证书追加到ca-certificates.crt文件里

先从docker registry服务器端把文件/etc/pki/CA/cacert.pem拷贝到本机,然后执行命令:

cat ./cacert.pem >> /etc/pki/tls/certs/ca-certificates.crt

(3) 验证`docker.yy.com`下的registry:

用浏览器输入: https://docker.yy.com 或者:curl -i -k https://abc:123@docker.yy.com

(4) 使用私有registry步骤:

登录: docker login -u abc -p 123 -e "test@gmail.com" https://docker.yy.com
给container起另外一个名字: docker tag centos:centos6 docker.yy.com/centos:centos6
发布: docker push docker.yy.com/centos:centos6

[X] Server端,操作私有仓库的步骤:

1. 从官方pull下来image!

docker push centos:centos6

2. 查看image的id

执行docker images 输出:

root@pts/0 # docker images
REPOSITORY                                   TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
centos                                       centos6             25c5298b1a36        8 days ago          215.8 MB

3. 给image赋予一个私有仓库的tag

docker tag 25c5298b1a36 docker.yy.com/centos:centos6

4. push到私有仓库

docker push docker.yy.com/centos:centos6

5. 查看image

docker images 输出:

root@pts/0 # docker images
REPOSITORY                                   TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
centos                                       centos6             25c5298b1a36        8 days ago          215.8 MB
docker.yy.com/centos                         centos6             25c5298b1a36        8 days ago          215.8 MB

[X] Client端,操作私有仓库的步骤:

1. 从私有仓库pull下来image!

docker pull docker.yy.com/centos:centos6

2. 查看image

docker images 输出:

root@pts/0 # docker images
REPOSITORY                                   TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
docker.yy.com/centos                         centos6             25c5298b1a36        8 days ago          215.8 MB

Docker的Web管理界面Shipyard

[0] 编辑`/etc/sysconfig/docker`文件

在DOCKER_OPTS里添加-H tcp://0.0.0.0:4243 -H unix:///var/run/docker.sock,例如:

DOCKER_OPTS="-H tcp://0.0.0.0:4243 -H unix:///var/run/docker.sock --insecure-registry docker.yy.com --tlsverify --tlscacert /etc/pki/CA/cacert.pem --registry-mirror=http://d194d5cb.m.daocloud.io"

[1] Start an data volume instance of RethinkDB:

docker run -it -d --name shipyard-rethinkdb-data --entrypoint /bin/bash shipyard/rethinkdb -l

[2] Start RethinkDB with using the data volume container:

docker run -it -P -d --name shipyard-rethinkdb --volumes-from shipyard-rethinkdb-data shipyard/rethinkdb

If your server is directly accessible on Internet, please note your RethinkDB installation may publicly listen to ports 49153 (local instance), 49154 (cluster) and 49155 (web interface) and so accessible to all.

[3] Start the Shipyard controller:

docker run -it -p 8080:8080 -d --name shipyard --link shipyard-rethinkdb:rethinkdb shipyard/shipyard

Shipyard will create a default user account with the usernameadmin and the passwordshipyard. You should then be able to open a browser tohttp://<your-host-ip>:8080and see the Shipyard login.

附录:

(1) 弊端:

server端可以login到官方的Docker Hub,可以pull,push官方和私有仓库! client端只能操作搭设好的私有仓库! 私有仓库不能search!

(2) 优点:

所有的build,pull,push操作只能在私有仓库的server端操作,降低企业风险!

(3) 当client端`docker login`到官方的`https://index.docker.io/v1/`网站,出现`x509: certificate signed by unknown authority`错误时

重命名根证书! mv /etc/pki/tls/certs/ca-certificates.crt /etc/pki/tls/certs/ca-certificates.crt.bak 重启docker服务! service docker restart!

本文参与腾讯云自媒体分享计划，分享自作者个人站点/博客。

如有侵权请联系 cloudcommunity@tencent.com 删除

容器

本文分享自作者个人站点/博客前往查看

如有侵权，请联系 cloudcommunity@tencent.com 删除。

本文参与腾讯云自媒体分享计划，欢迎热爱写作的你一起参与！

登录后参与评论

0 条评论

热度

Docker私有Registry在CentOS6.X下安装指南

Docker私有Registry在CentOS6.X下安装指南

(WJW)Docker私有Registry在CentOS6.X下安装指南

[X] Docker Server端配置

安装依赖

配置SSL

(1) 编辑/etc/hosts,把docker.yy.com的ip地址添加进来,例如:

(2) 生成根密钥

(3) 生成根证书

(4) 为我们的nginx web服务器生成ssl密钥

(5) 为nginx生成证书签署请求

(6) 私有CA根据请求来签发证书

安装,配置,运行nginx

(1) 添加组和用户:

(2) 下载nginx源文件:

(3) 编译,安装nginx:

(4) 生成htpasswd

(5) 编辑/opt/nginx/conf/nginx.conf文件

(6) 验证配置

(7) 启动nginx:

(8) 验证nginx是否启动:

配置,运行Docker

(1) 停止docker

(2)编辑/etc/sysconfig/docker文件,加上如下一行

(3) 把根证书复制到/etc/docker/certs.d/docker.yy.com/目录下

(4) 启动docker

下载,配置,运行registryimage

(1) 获取Image

(2) 运行Image

(3) 验证registry:

[X] Docker客户端配置

(1) 编辑/etc/hosts,把docker.yy.com的ip地址添加进来,例如:

(2) 把docker registry服务器端的根证书追加到ca-certificates.crt文件里

(3) 验证docker.yy.com下的registry:

(4) 使用私有registry步骤:

[X] Server端,操作私有仓库的步骤:

1. 从官方pull下来image!

2. 查看image的id

3. 给image赋予一个私有仓库的tag

4. push到私有仓库

5. 查看image

[X] Client端,操作私有仓库的步骤:

1. 从私有仓库pull下来image!

2. 查看image

Docker的Web管理界面Shipyard

[0] 编辑/etc/sysconfig/docker文件

[1] Start an data volume instance of RethinkDB:

[2] Start RethinkDB with using the data volume container:

[3] Start the Shipyard controller:

附录:

(1) 弊端:

(2) 优点:

(3) 当client端docker login到官方的https://index.docker.io/v1/网站,出现x509: certificate signed by unknown authority错误时

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

(1) 编辑`/etc/hosts`,把`docker.yy.com`的ip地址添加进来,例如:

(5) 编辑`/opt/nginx/conf/nginx.conf`文件

(2)编辑`/etc/sysconfig/docker`文件,加上如下一行

(3) 把根证书复制到`/etc/docker/certs.d/docker.yy.com/`目录下

下载,配置,运行`registry`image

(1) 编辑`/etc/hosts`,把`docker.yy.com`的ip地址添加进来,例如:

(3) 验证`docker.yy.com`下的registry:

[0] 编辑`/etc/sysconfig/docker`文件

(3) 当client端`docker login`到官方的`https://index.docker.io/v1/`网站,出现`x509: certificate signed by unknown authority`错误时