Mind+可视化编程环境初探

https://www.dji.com/cn/robomaster-tt/downloa

https://www.dji.com/cn/robomaster-tt?site=brandsite&from=nav

http://wiki.dfrobot.com.cn/

https://mindplus.dfrobot.com.cn/RMTT

https://mc.dfrobot.com.cn/forum-165-1.html

https://mc.dfrobot.com.cn/forum-165-1.html

C:\Program Files (x86)\Mind+\Arduino\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10804 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR -I C:\Program Files (x86)\Mind+\Arduino\hardware\arduino\avr\cores\arduino -I C:\Program Files (x86)\Mind+\Arduino\hardware\arduino\avr\variants\eightanaloginputs -I C:\Program Files (x86)\Mind+\Arduino\hardware\arduino\avr\cores\arduino -I C:\Program Files (x86)\Mind+\Arduino\hardware\arduino\avr\variants\standard C:\Users\yunswj\AppData\Local\DFScratch\cache\dfrobot.ino.cpp -o C:\Users\yunswj\AppData\Local\DFScratch\cache\dfrobot.ino.o
C:\Program Files (x86)\Mind+\Arduino\hardware\tools\avr\bin\avr-gcc -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p -o C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.elf C:\Users\yunswj\AppData\Local\DFScratch\cache\dfrobot.ino.o C:\Program Files (x86)\Mind+\Arduino\static/core/uno/core.a -lm
"C:\Program Files (x86)\Mind+\Arduino\hardware\tools\avr\bin\avr-objcopy" -O ihex -R .eeprom "C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.elf" "C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex"
项目使用了444字节，占用了(1%)程序存储空间，余留31812字节，最大为32256字节。
全局变量使用了9字节，(0%)的动态内存，余留2039字节局部变量，最大为2048字节。
C:\Program Files (x86)\Mind+\Arduino\hardware\tools\avr\bin\avrdude -CC:\Program Files (x86)\Mind+\Arduino/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM5 -b115200 -D -Uflash:w:C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex:i

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Program Files (x86)\Mind+\Arduino/hardware/tools/avr/etc/avrdude.conf"

         Using Port                    : COM5
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
         Hardware Version: 3
         Firmware Version: 4.4
         Vtarget         : 0.3 V
         Varef           : 0.3 V
         Oscillator      : 28.800 kHz
         SCK period      : 3.3 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex"
avrdude: writing flash (444 bytes):

Writing | ################################################## | 100% 0.08s

avrdude: 444 bytes of flash written
avrdude: verifying flash memory against C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex:
avrdude: load data flash data from input file C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex:
avrdude: input file C:\Users\yunswj\AppData\Local\DFScratch\build\dfrobot.ino.hex contains 444 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.06s

avrdude: verifying ...
avrdude: 444 bytes of flash verified

avrdude done.  Thank you.

上传成功

https://helpmanual.io/
https://helpmanual.io/

http://ccrma.stanford.edu/planetccrma/man/man1/avr-objcopy.1.html
https://helpmanual.io/help/avr-objcopy