CentOS 7.4下MySQL 5.7.20主从环境搭建（M-S）

星哥玩云

发布于 2022-08-16 16:21:14

3330

发布于 2022-08-16 16:21:14

MySQL主从原理：

一，master记录二进制日志，在每个事务更新数据完成之前，master在二进制日志中记录这些改变、mysql将事务写入二进制日志，即使事务中的语句都是交叉执行的。在事件写入二进制日志完成后，master通知存储引擎提交事务。

二，slave将master的binary log拷贝到它自己的中继日志。首先，slave开始一个工作线程——I/O线程。I/O线程在master上打开一个普通的连接，然后开始binlog dump process。Binlog dump process从master的二进制日志中读取事件，如果已经执行完master产生的所有文件，它会睡眠并等待master产生新的事件。I/O线程将这些事件写入中继日志。

三，SQL slave thread（SQL从线程）处理该过程的最后一步。SQL线程从中继日志读取事件，并重新执行其中的事件而更新slave的数据，使其与master中的数据一致。

主从配置：

　　主机名　　　　　　IP　　　　　　　　　　系统版本　　　　　　　　　　　　　mysql版本　　　角色

mysqlmaster.cn　　10.10.10.69 　 CentOS Linux release 7.4.1708 (Core)　　　　　　5.7.20　　　　master

mysqlslave.cn　　10.10.10.72　　 CentOS Linux release 7.4.1708 (Core)　　　　　　 5.7.20　　　　slave

步骤一、主从服务环境初始化

[root@mysqlmaster ~]# iptables -F [root@mysqlmaster ~]# systemctl stop firewalld [root@mysqlmaster ~]# systemctl disable firewalld [root@mysqlmaster ~]# systemctl stop NetworkManager [root@mysqlmaster ~]# systemctl disable NetworkManager

步骤二，安装mysql

下载地址：https://downloads.mysql.com/archives/community/

下载相应软件包后解压并把安装包上传到服务器

安装以下软件包，顺序从上到下，注意顺序错误会报错！！！！

mysql-community-common-5.7.20-1.el7.x86_64.rpm mysql-community-libs-5.7.20-1.el7.x86_64.rpm

mysql-community-client-5.7.20-1.el7.x86_64.rpm

mysql-community-server-5.7.20-1.el7.x86_64.rpm

安装

[root@mysqlmaster ~]# yum -y install mysql-community-common-5.7.20-1.el7.x86_64.rpm 已加载插件：fastestmirror, langpacks 正在检查 mysql-community-common-5.7.20-1.el7.x86_64.rpm: mysql-community-common-5.7.20-1.el7.x86_64 mysql-community-common-5.7.20-1.el7.x86_64.rpm 将被安装正在解决依赖关系 --> 正在检查事务 ---> 软件包 mysql-community-common.x86_64.0.5.7.20-1.el7 将被安装 --> 解决依赖关系完成

依赖关系解决

======================================================================================== Package 架构版本源大小 ======================================================================================== 正在安装: mysql-community-common x86_64 5.7.20-1.el7 /mysql-community-common-5.7.20-1.el7.x86_64 2.5 M

事务概要 ======================================================================================== 安装 1 软件包

总计：2.5 M 安装大小：2.5 M Downloading packages: Running transaction check Running transaction test

Transaction check error: file /usr/share/mysql/charsets/swe7.xml from install of mysql-community-common-5.7.20-1.el7.x86_64 conflicts with file from package mariadb-libs-1:5.5.56-2.el7.x86_64

错误概要 -------------

如上所示，出现了错误导致无法安装，但从错误信息可以看到，由于已经安装了mariadb数据库导致无法再安装mysql数据库，那就先把mariadb数据库卸载，

[root@mysqlmaster ~]# yum -y remove mariadb* （主从服务器均要卸载系统自带的mariadb数据库后才能安装mysql） 已加载插件：fastestmirror, langpacks 正在解决依赖关系 --> 正在检查事务 ---> 软件包 mariadb-libs.x86_64.1.5.5.56-2.el7 将被删除 --> 正在处理依赖关系 libmysqlclient.so.18()(64bit)，它被软件包 2:postfix-2.10.1-6.el7.x86_64 需要 --> 正在处理依赖关系 libmysqlclient.so.18(libmysqlclient_18)(64bit)，它被软件包 2:postfix-2.10.1-6.el7.x86_64 需要 --> 正在检查事务 ---> 软件包 postfix.x86_64.2.2.10.1-6.el7 将被删除 --> 解决依赖关系完成

依赖关系解决

======================================================================================== Package 架构版本源大小 ======================================================================================== 正在删除: mariadb-libs x86_64 1:5.5.56-2.el7 @anaconda 4.4 M 为依赖而移除: postfix x86_64 2:2.10.1-6.el7 @anaconda 12 M

事务概要 ======================================================================================== 移除 1 软件包 (+1 依赖软件包)

安装大小：17 M Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction 正在删除 : 2:postfix-2.10.1-6.el7.x86_64 1/2 正在删除 : 1:mariadb-libs-5.5.56-2.el7.x86_64 2/2 验证中 : 1:mariadb-libs-5.5.56-2.el7.x86_64 1/2 验证中 : 2:postfix-2.10.1-6.el7.x86_64 2/2

删除: mariadb-libs.x86_64 1:5.5.56-2.el7

作为依赖被删除: postfix.x86_64 2:2.10.1-6.el7

完毕！

[root@xuegodslave ~]# yum -y install mysql-community-common-5.7.20-1.el7.x86_64.rpm 已加载插件：fastestmirror, langpacks 正在检查 mysql-community-common-5.7.20-1.el7.x86_64.rpm: mysql-community-common-5.7.20-1.el7.x86_64 mysql-community-common-5.7.20-1.el7.x86_64.rpm 将被安装正在解决依赖关系 --> 正在检查事务 ---> 软件包 mysql-community-common.x86_64.0.5.7.20-1.el7 将被安装 --> 解决依赖关系完成

依赖关系解决

事务概要 ======================================================================================== 安装 1 软件包

总计：2.5 M 安装大小：2.5 M Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction 正在安装 : mysql-community-common-5.7.20-1.el7.x86_64 1/1 验证中 : mysql-community-common-5.7.20-1.el7.x86_64 1/1

已安装: mysql-community-common.x86_64 0:5.7.20-1.el7

完毕！

如上所示已经安装成功第一个包，同样的操作把剩下的三个包安装完毕！（主从服务器均进行同样操作）

步骤三，启动MySQL服务，并进行MySQL服务初始化（主从服务器均进行同样操作）

[root@mysqlmaster ~]# systemctl start mysqld

[root@mysqlmaster ~]# grep "password" /var/log/mysqld.log 　　查询mysql初始密码， 2018-05-12T14:50:13.167604Z 1 [Note] A temporary password is generated for root@localhost: Lil=#:VjS8*Z （初始密码）

[root@mysqlmaster ~]# mysql_secure_installation

Securing the MySQL server deployment.

Enter password for user root:　　　　　　这里输入：Lil=#:VjS8*Z

The existing password for the user account root has expired. Please set a new password.

New password:　　　　输入新密码 zX@987Weqqrd1

Re-enter new password: 　　重复一遍确认 zX@987Weqqrd1 The 'validate_password' plugin is installed on the server. The subsequent steps will run with the existing configuration of the plugin. Using existing password for root.

Estimated strength of the password: 100 Change the password for root ? ((Press y|Y for Yes, any other key for No) : y 修改密码确认

New password:　　再次输入 zX@987Weqqrd1

Re-enter new password:　　再次输入 zX@987Weqqrd1

Estimated strength of the password: 100 Do you wish to continue with the password provided?(Press y|Y for Yes, any other key for No) : y 确认修改 By default, a MySQL installation has an anonymous user, allowing anyone to log into MySQL without having to have a user account created for them. This is intended only for testing, and to make the installation go a bit smoother. You should remove them before moving into a production environment.

Remove anonymous users? (Press y|Y for Yes, any other key for No) : y 移除匿名用户 Success.

Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? (Press y|Y for Yes, any other key for No) : y 不允许root远程登录 Success.

By default, MySQL comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment.

Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y 删除测试数据库 - Dropping test database... Success.

- Removing privileges on test database... Success.

Reloading the privilege tables will ensure that all changes made so far will take effect immediately.

Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y　刷新权限表 Success.

All done!

说明：MySQL服务要求密码强度及复杂的都十分严格，如果需要使用简单密码可以修改系统配置文件/etc/my.cnf 加入validate_password=off 然后重启mysql服务进行修改就可以使用简单密码（以上步骤主从服务器均要执行）

步骤四、登录MySQL主服务器，创建一个测试数据库及表，并创建一个授权账号进行主从数据同步

[root@mysqlmaster ~]# mysql -uroot -p'zX@987Weqqrd1'　　使用新密码登录mysql mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 6 Server version: 5.7.20 MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

mysql> create database test;　　创建一个名为test的数据库 Query OK, 1 row affected (0.00 sec)

mysql> use test;　　切换到test数据库

Database changed　　 mysql> show tables;　　查询当前数据库表 Empty set (0.00 sec)

mysql> create table test1(id int,name varchar(20));　　创建一个测试表 Query OK, 0 rows affected (0.03 sec)

mysql> show tables; +----------------+ | Tables_in_test | +----------------+ | test1 | +----------------+ 1 row in set (0.00 sec)

创建授权账号：slave 指定从服务器IP：10.10.10.72　　密码：A@*qw92!derS

mysql> grant replication slave on *.* to slave@10.10.10.72 identified by "A@*qw92!derS"; Query OK, 0 rows affected, 1 warning (0.00 sec)

步骤五、主从服务器配置：

修改master系统配置文件 /etc/my.cnf 末尾加入一下内容

log-bin=mysql-bin-master 　　启用二进制日志

server-id=1 　　本机数据库ID 标示

binlog-do-db=test　　可以被从服务器复制的库, 二进制需要同步的数据库名（创建的测试数据库）

binlog-ignore-db=mysql 　　不可以被从服务器复制的库

[root@mysqlmaster ~]# systemctl restart mysqld　　重启数据库服务器

[root@mysqlmaster ~]# mysql -uroot -p'zX@987Weqqrd1'　　登录数据库 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.7.20-log MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

mysql> show binlog events\G *************************** 1. row *************************** Log_name: mysql-bin-master.000001 Pos: 4 Event_type: Format_desc Server_id: 1 End_log_pos: 123 Info: Server ver: 5.7.20-log, Binlog ver: 4 *************************** 2. row *************************** Log_name: mysql-bin-master.000001 Pos: 123 Event_type: Previous_gtids Server_id: 1 End_log_pos: 154 Info: 2 rows in set (0.00 sec)

如上所示，master服务器已配置成功

mysqldump -uroot -p'zX@987Weqqrd1' test >test.sql 导出master测试数据库test

[root@mysqlmaster ~]# mysqldump -uroot -p'zX@987Weqqrd1' test >test.sql mysqldump: [Warning] Using a password on the command line interface can be insecure. [root@mysqlmaster ~]# ll test.sql -rw-r--r-- 1 root root 1790 5月 13 00:01 test.sql

将导出的数据库传到slave服务器上

[root@mysqlmaster ~]# scp test.sql 10.10.10.72:/root The authenticity of host '10.10.10.72 (10.10.10.72)' can't be established. ECDSA key fingerprint is SHA256:cHQticA8/IMXFPFXspEnN0h4FLG7LaXnT8Zpr7ricrA. ECDSA key fingerprint is MD5:1a:70:c5:60:05:47:6a:75:8a:47:db:85:51:1c:32:2c. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.10.10.72' (ECDSA) to the list of known hosts. root@10.10.10.72's password: test.sql 100% 1790 1.9MB/s 00:00

配置从服务器

[root@xuegodslave ~]# mysql -uslave -p'A@*qw92!derS' -h 10.10.10.69　　在slave服务器上使用授权账号slave登录master mysql测试授权账号能否登录 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 8 Server version: 5.7.20-log MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

mysql> show databases;　　 +--------------------+ | Database | +--------------------+ | information_schema | +--------------------+ 1 row in set (0.00 sec)

如上所示查询不到test测试数据库

mysql> exit;　　退出master数据库 Bye

[root@xuegodslave ~]# mysql -uroot -p'zX@987Weqqrd1'　　登录slave服务器，密码初始化与master相同 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 12 Server version: 5.7.20 MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

mysql> create database test;　　创建测试数据库 Query OK, 1 row affected (0.01 sec)

mysql> exit;　　退出数据库 Bye [root@xuegodslave ~]# mysql -uroot -p'zX@987Weqqrd1' test<test.sql　　将master导出的数据库内容导入slave创建的test数据库内 mysql: [Warning] Using a password on the command line interface can be insecure.

[root@xuegodslave ~]# mysql -uroot -p'zX@987Weqqrd1' 登录slave服务器 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 15 Server version: 5.7.20 MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> use test; 切换到test数据库 Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A

Database changed mysql> show tables;　　查看数据库内容 +----------------+ | Tables_in_test | +----------------+ | test1 |　　　　已存在master服务器创建的表test1，导入成功 +----------------+ 1 row in set (0.00 sec)

mysql> exit; Bye [root@xuegodslave ~]# systemctl stop mysqld　　停掉slave数据库服务 [root@xuegodslave ~]# vim /etc/my.cnf　　编辑slave服务器数据库配置文件末尾添加一行 server-id=2 （从服务器ID号，不要和主ID相同，如果设置多个从服务器，每个从服务器必须有一个唯一的server-id值，必须与主服务器的以及其它从服务器的不相同。可以认为server-id值类似于IP地址：这些ID值能唯一识别复制服务器群集中的每个服务器实例。）

[root@xuegodslave ~]# systemctl start mysqld　　启动mysql服务 [root@xuegodslave ~]# mysql -uroot -p'zX@987Weqqrd1' 登录mysql服务器 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.7.20 MySQL Community Server (GPL)

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> stop slave;　　停止slave Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> change master to master_host='10.10.10.69',master_user='slave',master_password='change master to master_host='10.10.10.69',master_user='slave',master_password='A@*qw92!derS';　　（授权slave服务器同步master，指定账号和密码） Query OK, 0 rows affected, 2 warnings (0.05 sec)

mysql> start slave;　　启动slave Query OK, 0 rows affected (0.01 sec)

mysql> show slave status \G　　查看状态 *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.10.10.69 Master_User: slave Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin-master.000001 Read_Master_Log_Pos: 448 Relay_Log_File: xuegodslave-relay-bin.000002 Relay_Log_Pos: 675 Relay_Master_Log_File: mysql-bin-master.000001 Slave_IO_Running: Yes　　一个负责与主机的io通信

Slave_SQL_Running: Yes　　负责自己的slave mysql进程

如上图所示，主从服务器均运行并连接成功

再到主服务器上查看状态：