查阅JavaDocs和Thread.interrupt()方法在Java SE 7中的源代码,我发现如下:
public void interrupt() {
if (this != Thread.currentThread())
checkAccess();
synchronized (blockerLock) {
Interruptible b = blocker;
if (b != null) {
interrupt0(); // Just to set the interrup
我面临着奇怪的行为。所有来源都告诉我们,在捕获中断异常以恢复中断标志后,需要调用Thread.currentThread().interrupt()。但我尝试创建了一个简单的应用程序,可以在进程中断后检查中断状态
public class Main {
public static void main(String[] args) throws InterruptedException {
Runnable r = () -> {
try {
Thread.sleep(100000);
我正在为超声波距离传感器编写一个简单的库,我想我应该尝试使用中断。
但是,我不能正确地设置attachCallback方法中的函数。
我希望在引脚变高和变低时分别调用HCSR04Interrupt::echoHigh()和HCSR04Interrupt::echoLow()。
我已经在谷歌上搜索过了,但没有用。Ardiuno IDE说明了以下内容:
./Arduino/libraries/HCSR04/HCSR04Interrupt.cpp: In member function 'void HCSR04Interrupt::getDistance()':
./Arduino/
根据GIC手册,GICD_ISENABLER
Reads
0 Forwarding of the corresponding interrupt is disabled.
1 Forwarding of the corresponding interrupt is enabled.
Writes
0 Has no effect.
1 Enables the forwarding of the corresponding interrupt.
GICD_ICENABLER
Reads
0 Forwarding of the corresponding interrupt is disab
在RTEMS初始化例程中,我看到下面的代码。
void boot_card(const char *cmdline)
{
rtems_interrupt_level bsp_isr_level;
/*
* Special case for PowerPC: The interrupt disable mask is stored in SPRG0.
* It must be valid before we can use rtems_interrupt_disable().
*/
#ifdef PPC_INTERRUPT_DISABLE_MASK_DEFAUL
我正在尝试设置内核的IDT,但是我得到了这个链接错误:
bin/obj/idt.o: In function `setup_idt':
idt.c:(.text+0x9b): undefined reference to `interrupt_handler_1'
错误提示没有定义interrupt_handler_1,但它是interrupt_manager.asm中的宏:
%macro no_error_code_interrupt_handler 1
global interrupt_handler_%1
interrupt_handler_%1:
cli
在嵌入式系统上,我有一个函数,它不能从中断上下文中调用。我希望确保它在编译时被检查。我想,如果预处理器能检查一下就好了。我的想法是这样的:
/* function that shall not be called from interrupt-context */
void function_not_to_call_from_isr(void)
{
#ifdef INTERRUPT_CONTEXT
#error This shall not be called from interrupt context!
#endif
// ... stuff ...
如何使用LIDT创建IDT我在Intel-Atom 32位上工作(汇编AT&T)。我使用MocroC操作系统作为操作系统,我这样做了,但它不工作:
Load_IDT:
push %ebp //save the context to swith back
mov %esp,%ebp
movw $256*8, -6(%esp) //256 ISR possible
movl $IDT, -4(%esp) //IDT is a table of 256*8bytes
lidt -6(%esp)
pop %ebp //Return
我想为STM32F3Discovery板编写一个使用铁锈、cortex-m-rt和stm32f30x板条箱的程序。更确切地说,我希望实现一个外部中断,我希望对其使用#[interrupt]属性。但再出口似乎存在问题。
说,不应该直接使用#[interrupt]属性,而应该使用设备机箱中的再导出:
extern crate device;
// the attribute comes from the device crate not from cortex-m-rt
use device::interrupt;
#[interrupt]
fn USART1() {
// ..
}
我在具有高编译器优化的MSP430中使用了定时器A,但当使用高编译器优化时,我发现我的定时器代码失败。当没有使用任何优化时,代码可以正常工作。
此代码用于实现1ms的定时器滴答。timeOutCNT在中断中递增。
以下是代码
//Disable interrupt and clear CCR0
TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK
TIMER_A_ID | // set the divi