我把我的电容式液晶显示器连接到tiny6410上,并在上面安装linux。我还将friendlyarm.ini更改为:
#This line cannot be removed. by FriendlyARM(www.arm9.net)
CheckOneButton=No
Action=Install
OS= Linux
LCD-Mode = No
LCD-Type = S70
LowFormat = No
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper| LED
#################### Linux #
我正在用Python编写液晶显示屏的代码,我希望它能显示闪烁的“按下选择”信息,直到按下液晶显示上的一个按钮。
问题是,当程序处于休眠状态时,它不会注册用户按下按钮,这意味着我必须在打印消息时准确地按下该按钮。
我怎么能不睡觉就这么做呢?
这是我使用的代码:
#lcd.is_pressed(LCD.SELECT) - checks if button is pressed
#lcd.message - prints text on LCD
#lcd.clear - removes all text from LCD
while not lcd.is_pressed(LCD.SELECT):
我用16x2LCD连接Arduino,连接如下
我用的程序
#include <LiquidCrystal.h>
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
void setup() {
// set up the LCD's number of columns and rows:
lcd.begin(16, 2);
// Print a message to the LCD.
lcd
我正在做一个圆周率设备,它可以在lcd屏幕上显示它的ip地址。代码在大部分情况下都能正常工作。它通过linux中的自动化进程( cron守护进程)进行重复。这工作得很好,但是当脚本重复时,ip信息不会更新。我在这里和网上查看了如何清除存储的字符串,但我被卡住了。请谁来帮帮忙。
以下是代码的主要部分。
#!/usr/bin/python
import time
import sys
import Adafruit_CharLCD as LCD
from Adafruit_CharLCD import Adafruit_CharLCD
from subprocess import *
from
我用做了一个简单的液晶显示例子。起作用后,我想玩它。我写了一个程序来计算这个屏幕的fps。最大的问题是Arduino的速度有多慢。
程序代码在这里:
// include the library code:
#include <LiquidCrystal.h>
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(7, 8, 9, 10, 11, 12);
int lastMillis = 0;
long fps = 0;
void setup() {
lcd.
我正在从web服务器上获取文本,并试图在python上的raspberry pi屏幕上显示当前的歌曲。使用LCD 16x2
#!/usr/bin/python
# Example using a character LCD connected to a Raspberry Pi or BeagleBone Black.
import math
import time
import urllib2
from BeautifulSoup import BeautifulSoup
import Adafruit_CharLCD as LCD
page = urllib2.urlopen(
我最近买了一个STM8单片机,它有内置的LCD_GLASS_DisplayString("STRING")函数。
该函数的问题是,正如您在下面看到的,我不能直接在其上显示一个整数:
void LCD_GLASS_DisplayString(uint8_t* ptr)
{
uint8_t i = 0x01;
LCD_GLASS_Clear();
/* Send the string character by character on lCD */
while ((*ptr != 0) & (i < 8))
{
/* Display
我正在把我的C代码写到一块PIC板上。我的问题是如何让我的程序计算一个按钮(RB0)被按下多长时间。然后,它会显示所用的时间,并将其显示在LCD显示器上。它以毫秒计。下面是我目前为止的代码。
// Global Variables
unsigned int COUNTER;
// Subroutine Declarations
#include <pic18.h>
#include "lcd_portd.c"
//LCD routine, modified from previous examples
void LCD_Out(unsigned int S