我正在用MCP2515编程微控制器MCP2515 SPI接口。它将在每224 to中设置一个标志,计时器计数器将从0*F8增加到0*FF,然后溢出以设置此标志。因此,32 07H *07H=224 07H。问题是如何让计时器每32毫秒中断一次,这32毫秒从何而来。
//Timer interrupts every 32ms and set a flag every 224ms (32ms * 07H = 224ms)
//Initial value = FFH - 07H = F8H
if(T0IF) //TMR0 overflow interrupt flag bit
{
测试其他的东西,我偶然发现一些东西,我还没有设法弄清楚。
让我们来看看这个片段:
#include <iostream>
#include <chrono>
int main () {
int i = 0;
using namespace std::chrono_literals;
auto const end = std::chrono::system_clock::now() + 5s;
while (std::chrono::system_clock::now() < end) {
++i;
}
std::cout <
我得到以下奇怪的警告信息,有时当点击8.8.8.8 (发生率很低)。知道根本原因吗?
$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=111 time=256 ms
ping: Warning: time of day goes back (-203756us), taking countermeasures
ping: Warning: time of day goes back (-203647us), taking countermeasur
下面是.xco文件中的代码,它从我的主vhdl文件中分支出来:
-- The following code must appear in the VHDL architecture header:
------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG
component DCM_18
port
(-- Clock in ports
CLK_IN1 : in std_logic;
-- Clock out ports
CLK_OUT1 : out
我正在尝试创建一个简单的程序,读取RTC时钟值并将其打印到串行监视器。USART运行良好,但我不知道RTC出了什么问题。它始终为我提供在setuRTC()中设置的相同值。另外,第二个中断也不起作用。编辑:我使用的是STM32f1开发板,和一样
以下是我的RTC设置:
void setupRTC(void){
RCC->APB1ENR |= (RCC_APB1ENR_PWREN | RCC_APB1ENR_BKPEN); //Enable the power and backup interface clocks by setting the PWREN and BKPEN bit
我正在尝试用PIC24F构建服务器。
这是我想要的一段代码:
switch(TCPServerState) {
case SM_HOME:
// Allocate a socket for this server to listen and accept connections on
socket.Socket = TCPOpen(0, TCP_OPEN_SERVER, SERVER_PORT, TCP_PURPOSE_GENERIC_TCP_SERVER);
if(sock
我们使用cisco催化剂3750x 24端口开关系列。
如何更改开关上的确切日期(新加坡)
ASW-G-L09-001#show running-config
Building configuration...
Current configuration : 11883 bytes
!
! Last configuration change at 15:46:32 PST Wed May 18 2011
!
version 15.2
no service pad
service timestamps debug datetime msec localtime
service timesta
[用户在上发布的问题]
在YugabyteDB集群中获取此错误:
F0531 17:26:15.079571 129854 hybrid_clock.cc:177] Too big clock skew is detected: 0.920s, while max allowed is: 0.900s; clock_skew_force_crash_bound_usec=60000000
我正在调整我的--max_clock_skew_usec配置中的TServer参数。但我也想知道clock_skew_force_crash_bound_usec是从哪里来的。