我试图构建v4l2loopback,只需输入:
制作
Building v4l2-loopback driver...
make -C /lib/modules/`uname -r`/build M=/home/user/dev/labs/v4l2loopback modules
make[1]: Entering directory '/usr/lib/modules/5.13.0-22-generic/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving d
在sudo apt upgrade期间,我得到以下错误。也在sudo apt autoremove --purge上。
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk sp
我正试图在我的集装箱里运行码头。我在这篇文章中看到,为了使这一切成为可能,我需要通过-特权=真。
但是由于某种原因,我没有在运行时传递这个参数的选项。因为它是由一些我无法访问的自动化设备来处理的。
因此,我想知道是否可以在Dockerfile中传递上面的选项,这样我就不会将它作为param传递。
现在,这是我的dockerfile的内容。
FROM my-repo/jenkinsci/jnlp-slave:2.62
USER root
#RUN --privileged=true this doesnt work for obvious reasons
MAINTAINER RD_TOOLS
root@kali-linux:~/Softwares/Softwares/Tools/dirsearch# array=()
root@kali-linux:~/Softwares/Softwares/Tools/dirsearch# for i in 1 2 3 4
> do
> array+=($i)
> done
root@kali-linux:~/Softwares/Softwares/Tools/dirsearch# echo $array
1
root@kali-linux:~/Softwares/Softwares/Tools/dirsearch# for i
由于磁盘空间,我遇到了一个升级/安装失败循环,但我看不出哪个驱动器已经满了。我试过清洁,自动清洗和自动移除,但都没有用。这是AWS上的Ubuntu。在我的/boot目录中有一堆内核(列在下面),但是我不知道如何清理它,因为清理、自动清理、自动删除都不起作用。下面列出了升级、安装和df命令输出:
sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get
我有点卡住了,还是个初学者。在升级过程中,我的dev/sda1 1似乎达到了容量。
sudo apt-get autoremove
给我:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
linux-image-extra-4.4.
在Ubuntu20.04上运行时,在试图更新时出现了/boot错误消息上的低磁盘空间。
The upgrade needs a total of 228 M free space on disk '/boot'. Please free at least an additional 24,8 M of disk space on '/boot'.
在我的/boot文件夹中,我有以下文件:
/boot
total 460452
drwx------ 3 root root 4096 Jan 1 1970 efi
-rw-r--r-- 1 root r
我升级了从18.04到Ubuntu20.04.1,但得到一个固件错误,如何修复这个问题?
尝试过的I : sudo配置-a
rt@sys76:~$ sudo dpkg --configure -a
dpkg: error processing package linux-firmware (--configure):
package is in a very bad inconsistent state; you should
reinstall it before attempting configuration
dpkg: dependency problems prevent co
我最近将我的Linux内核从4.19.20升级到5.5.0-0.bpo.2-amd64 64。
sudo apt install linux-headers-$(uname -r)输出:
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-5.5.0-0.bpo.2-amd64 is already the newest version (5.5.17-1~bpo10+1).
0 upgraded, 0 newly instal
我正试图在我的桌面上安装一个brostrend1200mbps wifi适配器,并在安装过程中一直遇到问题。我正在尝试安装驱动程序,但它们还没有在ubuntu上可用。在试图编译内核模块时,我会收到以下错误:
root@chris-pc:~# cd rtl8812AU_8821AU_linux
root@chris-pc:~/rtl8812AU_8821AU_linux# make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.13.0-119-generic/build M=/root/rtl8812AU_8821AU_linux m