发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/164682.html原文链接:https://javaforall.cn
ifconfig 早期网络管理的指令,目前Linux新的发行版本很多默认不带ifconfig命令,但可以以通过安装软件包net-tools方式进行使用. ifconfig 查看当前所有up状态的网卡信息 ifconfig xxxx 查看xxxx网卡详细信息 ifconfig eth0 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.2.255 配置网卡信息 ifconfig eth0 up 启动eth
在终端上输入命令:#ifconfig或者#ifconfig -a,就可以查看到网卡的信息。
linux重启网卡命令有:1、命令【service network restart】;2、命令【ifconfig eth0 down / ifconfig eth0 up】;3、命令【ifdown eth0 / ifup eth0】。
Linux 的 ifconfig 命令可以用来查看、配置或激活网络设备的信息,包括设备的IP地址、子网掩码、广播地址、MAC地址等。
在实际工作中,经常会遇到Linux系统进行重启网卡的操作。接下来是小编为大家收集的linux系统重启网卡方法,希望能帮到大家。
注:虚拟机系统通过克隆方式得到其他系统后,在同一网络中无法上网,很可能由于其网卡的UUID相同造成冲突引起的。 解决方案:
版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。
今天在一台PC上安装了CentOS 7,当时选择了最小安装模式,安装完成后马上用ifconfig查看本机的ip地址(局域网已经有DHCP),发现报错,提示ifconfig命令没找到。 [root@ce
在使用CentOS Linux的过程中,有时候会遇到一个错误信息,提示“Device eth0 does not seem to be present”的问题。这个错误通常发生在网络配置方面出现问题的情况下,导致网络接口 eth0 无法正常识别。 在本篇博客文章中,我们将介绍解决这个问题的一些方法。
利用 ethtool 可以根据需要更改以太网卡的参数,包括自动协商、速度、双工和局域网唤醒等参数。
netem 与 tc: netem 是 Linux 2.6 及以上内核版本提供的一个网络模拟功能模块。该功能模块可以用来在性能良好的局域网中,模拟出复杂的互联网传输性能,诸如低带宽、传输延迟、丢包等等情况。使用 Linux 2.6 (或以上) 版本内核的很多发行版 Linux 都开启了该内核功能,比如 Fedora、Ubuntu、Redhat、OpenSuse、CentOS、Debian 等等。 tc 是Linux 系统中的一个工具,全名为 traffic control(流量控制)。tc 可以用来控制 netem 的工作模式,也就是说,如果想使用 netem ,需要至少两个条件,一个是内核中的 netem 功能被包含,另一个是要有 tc 。
Linux网络基本网络配置方法介绍 网络信息查看 设置网络地址: cat /etc/sysconfig/network-scripts/ifcfg-eth0 你将会看到: DEVICE=eth0 BOOTPROTO=statics HWADDR=00:0C:29:13:D1:6F ONBOOT=yes TYPE=Ethernet IPADDR=192.168.0.212 NETMASK=255.255.255.0 BOOTPROTO=statics :表示使用静太IP地址。 ONBOOT=y
大家好,又见面了,我是你们的朋友全栈君。 大家在实际工作中,经常会遇到Linux系统进行重启网卡的操作,那么具体如何进行重启呢?下面就由学习啦小编跟大家分享一下操作步骤吧,希望对大家有所帮助~ l
ifconfig(configure a network interface)命令是系统管理员命令,用于查看和配置网络接口。
前言:主要针对于Linux中网络/路由/通信通道类命令进行学习,加深对Linux的使用;
/etc/sysconfig/network-scripts/ifcfg-ens33
功能:ifconfig命令被用于配置和显示Linux内核中网络接口的网络参数。用ifconfig命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。要想将上述的配置信息永远的存的电脑里,那就要修改网卡的配置文件了。
在Linux下网卡接口逻辑名被称为eth0,eth1,eth2,.....,ethN,所有网卡接口的配置文件都存储在/etc/sysconfig/network-scripts/下,文件名是以ifcfg-eth0,ifcfg-eth1,ifcfg-eth2,....,ifcfg-ethN形式来命名的。一个网卡接口对应一个配置文件。如果我们要给某个网卡接口配置两个IP地址,我们该怎么办呢?
ifconfig 命令用于配置和显示 Linux 内核中网络接口的网络参数。用 ifconfig 命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。若想将上述的配置信息永久存储在电脑里,需要修改网卡的配置文件。
如何配置Linux系统的IP地址,使其能够连接局域网甚至外网。其实这并不难,Linux系统网络配置的方法有多种。
网卡命名规则受biosdevname和net.ifnames两个参数影响 如果你的网卡名不是eth0怎么设置为eth0呢?
说到docker,大家都懂。但是LXC可能就比较陌生。Docker的起源于LXC。LXC的英文全称是Linux Container,相比较其他虚拟机而言,是一种轻量级虚拟化技术,它介于Chroot(linux的一个改变根目录挂载点的机制)和完整开发的虚拟机之间。LXC不使用单独的内核资源,但是可以创建一个类似的Linux操作系统环境。
在Linux下, 通常使用netem或bridge来模拟网络不稳定情况。 在模拟过程中, 最好使用虚拟机。 如果是远程机器, 那么网络环境模拟需要两块网卡, 而桥模拟最好使用三块网卡。 就是需要附加一个网卡, 用作管理。
ifconfig命令被用于配置和显示Linux内核中网络接口的网络参数。用ifconfig命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。要想将上述的配置信息永远的存的电脑里,那就要修改网卡的配置文件了。
修改IP永久生效按以下方法 vi /etc/sysconfig/network-scripts/ifcfg-eth0(eth0,第一块网卡,如果是第二块则为eth1) 按如下修改ip: DEVICE=eth0 #如果是第二块刚为eth1 BOOTPROTO=static #网卡获得ip地址的方式,static和dhcp两种方式 IPADDR=192.168.1.122 #改成要设置的IP NETMASK=255.255.255.0 #子网掩码 GATEWAY=192.168.1.1 #网关地址 HWADDR
1.查看当前网络设置 ifconfig ifconfig eth0; #查看eth0接口网络设置 ifconfig -a #查看所有网络接口的信息 route 显示路由表 route | grep default 显示主机的默认网关。 ping -c 4 192.168.1.10 发送指定数量的数据包进行网络连接测试。 traceroute 192.168.1.10 测试与其他主机的网络连接路径。 hostname 显示当前主机名称。 ifdown eth0
本期文章主要简单介绍Linux中常用的系统命令,包括:stat、who、whoami、hostname、uname、top、ps、du、df、ifconfig、free、clear、alias等。
上一篇文章中《图解Linux网络包接收过程》,我们梳理了在Linux系统下一个数据包被接收的整个过程。Linux内核对网络包的接收过程大致可以分为接收到RingBuffer、硬中断处理、ksoftirqd软中断处理几个过程。其中在ksoftirqd软中断处理中,把数据包从RingBuffer中摘下来,送到协议栈的处理,再之后送到用户进程socket的接收队列中。
公司新来一台服务器,系统已经装好了,操作系统为CentOS,具体版本不太清楚。但是插上网线后,不能联网,通过初步分析,应该是网卡配置的问题。
认定一件事,即使拿十分力气都无法完成,也要拿出十二分力气去努力。 ---《剑来》
环境: RHEL6.4 需求: Linux一块网卡添加多个IP地址 一、临时生效 1.1 网卡eth0添加一个IP地址 1.2 修改eth0:0的广播地址 二、永久生效 2.1 编辑ifcfg-eth0:0 2.2 重启网卡生效配置 当前eth0的配置: # ifconfig eth0 Link encap:Ethernet HWaddr 2A:2E:BE:CF:8C:DC inet addr:192.168.99.159 Bcast:192.168.99.255
2.以管理员身份登录云服务器,执行如下命令,查看需配置(未显示 IP)的网卡信息,如图所示,需配置的网卡名称为eth1:
Linux内核对网络包的接收过程大致可以分为接收到RingBuffer、硬中断处理、ksoftirqd软中断处理几个过程。其中在ksoftirqd软中断处理中,把数据包从RingBuffer中摘下来,送到协议栈的处理,再之后送到用户进程socket的接收队列中。
大家好,又见面了,我是你们的朋友全栈君。 Linux如何添加路由 a.如何使用命令给Linux添加一个默认网关? 缺省网关路由: 默认网关就是数据包不匹配任何的路由规则,最后流经的地址关口!网关按字面意思就是网络的关口 ,就相当于我们办公室的大门一样,大家上班就要经过办公室的门一样。 使用route -n 查看网关信息,或者 netstat -rn查看路由 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何删除路由表: [root@machine1 ~]# route del default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 配置方法: 1、setup 2、配置网卡配置文件:/etc/sysconfig/network-scripts/ifcfg-eth0 关键字:GATEWAY=192.168.0. 重启网卡配置生效 3、route add default gw 192.168.0.1 #(临时生效) [root@machine1 ~]# route add default gw 192.168.0.1 [root@machine1 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 如何添加网络路由? b.网络路由:即去往某个网段的路由 一般多个网段之间相互通信,希望建立一条优先的路由,而不是通过默认的网关。拿家里来说, 你要去卫生间有卫生间的门,去卧室有卧室的门。这两个门就是网络路由了。家里的大门呢,就是 默认路由。
找到与ifconfig 查出出的MAC相同的一行(NAME='eth1'这一行),把它改为"NAME=eth0 ",然后把上面一行(NAME='eth0')注释掉。
ip 命令是一个新的网络命令行实用程序,用于在 Linux 系统上为网络接口分配 IP 地址或配置/更新网络配置。 它是 iproute2 软件包的一部分,并提供多项网络管理任务,例如打开或关闭网络接口、分配和删除 IP 地址和路由、管理 ARP 缓存等等。 ip命令与旧的ifconfig 命令非常相似,但它的功能要强大得多,添加了更多的功能和能力。 如何配置静态 IP 地址 Internet 协议 (IPv4) 要在 Linux 中配置静态 IP 地址, 你需要更新或编辑网络配置文件以将静态 IP 地址分
eth0 09be0948-faf1-43b6-a5a4-c19efab0bb48 ethernet eth0
tc 是linux 内置的命令;使用man pages 查看 我们看到,其功能为 show / manipulate traffic control settings,可对操作系统进行流量控制;
Linux下的ifconfig命令(英文全称是“network interfaces configuring”)是用于配置和显示Linux内核中网络接口的网络命令。用ifconfig命令配置的网卡信息,在网卡重启后机器重启后,配置就不存在。要想将上述的配置信息永远的存的电脑里,那就要修改网卡的配置文件了。有点类似windows系统下的ipconfig命令行工具
Linux下用于配置或者查看IP地址、路由表的命令有很多,本文打算将其都罗列出来,后面想到其它的命令再一一补充。
混杂模式就是接收所有经过网卡的数据包,包括不是发给本机的包,即不验证MAC地址。普通模式下网卡只接收发给本机的包(包括广播包)传递给上层程序,其它的包一律丢弃。
Linux服务器默认网卡配置文件在/etc/sysconfig/network-scripts/下,命名的名称一般为:ifcfg-eth0 ifcfg-eth1 ,eth0表示第一块网卡,eth1表示第二块网卡,依次类推。一般DELL R720标配有4块千兆网卡。
root@linuxidc:~# egrep -o '(vmx | svm)' /proc/cpuinfo
当向外界主机发送数据时,在它从网卡流入后需要对它做路由决策,根据其目标决定是流入本机数据还是转发给其他主机,如果是流入本机的数据,则数据会从内核空间进入用户空间(被应用程序接收、处理)。当用户空间响应(应用程序生成新的数据包)时,响应数据包是本机产生的新数据,在响应包流出之前,需要做路由决策,根据目标决定从哪个网卡流出。
测试过程:client上发1000字节的SQL到server,client上发超过1500字节的SQL到server
领取专属 10元无门槛券
手把手带您无忧上云