我有以下问题:例如,我给出了代码:
uint8_t a = 0x30;
uint16_t b = a << 8;
a会先被移动,然后转换成uint16_t吗?还是首先将其转换为uint16_t?或者这个行为是编译器依赖的?我正在尝试构建一个将lsb和msb分别作为uint16_t的uint8_t。
我不知道这种行为取决于它是C还是C++,谁能告诉我在这两种情况下它是如何工作的吗?
uint16_t ReverseInt16(uint16_t nonreversed) {
uint16_t reversed = 0;
reversed |= (nonreversed & 1 << 15) << 0; //check if bit 15 of nonreversed int is 1, if yes, write 1 to position 0, else write 0 to position 0
reversed |= (nonreversed & 1 << 14) << 1
这是我的代码-它的经典乘法A*B =C
private static int MASK = 0x00ff;
public static int multiplication(byte[] A, byte[] B, byte[] R)
{
byte n = 0;
int bb;
int sum = 0;
int lenbyte = 0;
for (int c = 0; c < R.Length; c++) //R set 0
{
R[c] = 0;
}
int j = B.Length - 1;
i
我想把一个16位数除以二。我对这个问题的解决办法如下
lda $17 ;set high byte
ldx $32 ;set low byte
divide:
PHA ;push A to stack
TXA ;X > A
LSR ;divide low byte by 2
TAX ;A > X
PLA ;pull A from stack
LSR ;divide high byte
我才刚开始进入斯威夫特开发阶段。我在Java中有以下方法:
public static byte[] addChecksum(byte[]command, boolean isDeviceSendFormat) {
int checksum = 0;
int l = command.length;
for (int i=0; i<l-2; i++) {
if (i==1 && isDeviceSendFormat==true) {
continue;
}
int val
可能重复:
检测是否发生整数截断的最佳方法是什么?
编辑
这应该会导致截断信号,但它不会
#include <iostream>
using std::cout;
typedef signed int int32_t;
typedef unsigned int uint32_t;
typedef signed short int16_t;
typedef unsigned short uint16_t;
int32_t my32bitInt = 0xffffffff;
int32_t tmp = my32bitInt & 0xFFFF8000;
uint
从过去的2周开始,我试图在arduino mega 2560上集成一个IC MAX17205 (燃油量规)。在这种情况下,我能够读写寄存器,但是每当我试图将Shadow 的内容复制到非易失性内存时,就会变得很高,没有这种情况,我就不能修改PackCfg reg &获得3S信元<code>E 213</code>配置的电压。请帮我这个忙。我提供了到数据表的链接和下面的代码。
max17205.ino
/**
This is an example demonstrating the use of the max1720x library
Print o