影响FPGA时序的进位链（Carry Chain）， 你用对了么？？

a = 4'b1000;
b = 4'b1100;

S = a ^ b = 4'b0100;
D = b = 4'b1100;          //D取a也可以
CIN = 0;                  //没有上一级的进位输入
CYINIT = 0;               //初始值为0
// 下面为CARRY4的计算过程，具体的算法跟上图中过程一样
S0 = 0；                  //S的第0位
O0 = S0 ^ 0 = 0 ^ 0 = 0;
CO0 = DI0 = 0;            //上图中的MUXCY，S0为0时，选择1，也就是DI0，S0为1是选择2
S1 = 0;
O1 = S1 ^ CO0 = 0 ^ 0 = 0;
CO1 = DI1 = 0;
S2 = 1;
O2 = S2 ^ CO1 = 0 ^ 1 = 1;
CO2 = CO1 = 0;
S3 = 0;
O3 = S3 ^ CO2 = 0 ^ 0 = 0;
CO3 = DI3 = 1;

module top(

 input clk,
 input [7:0] din_a,
 input [7:0] din_b,
 output reg[7:0] dout
    );

 always @ ( posedge clk )
 begin
    dout <= din_a + din_b;
 end  
endmodule

module top(

 input clk,
 input [47:0] din1,
 input [47:0] din2,
 output reg[47:0] dout1,
 output    [47:0] dout2
 );

 always @ ( posedge clk )
 begin
    dout1 <= din1 + 1'b1;
 end  

 genvar i;
 generate
 for(i = 0;i < 3;i=i+1) begin:LOOP
    wire carry_co;
    reg [15:0] carry_o=0;
    wire ci;
    if(i==0)  begin
        always @ ( posedge clk )
         begin
            carry_o <= din2[i*16+:16] + 1'b1;
         end
     end //if
     else begin
        always @ (posedge clk) begin
            if(LOOP[i-1].carry_co == 1)
                carry_o <= carry_o + 1'b1;
        end
     end //else
    assign LOOP[i].carry_co = (LOOP[i].carry_o==16'hffff)?1'b1:1'b0;
    assign dout2[i*16+:16] = LOOP[i].carry_o;

 end //for

 endgenerate

endmodule